Cover
EQIO
CPCI-6048
PRODUCT MANUAL
6U Phytium D2000 CompactPCI System Controller
Phytium D2000 8-core processor
Appearance reference (generated from product photos); shipped units may differ.
Measurement and control, made easy.
Easy · Quick · Input · Output
EQIO.COM
Overview
EQIO
{{chapter}}
EQIO · CPCI-6048 Product Manual
{{page}} / {{pages}}
01 OVERVIEW
6U Phytium D2000 CompactPCI System Controller
CPCI system controller · Industrial measurement and control · Network safety equipment · Industrial gateway · CompactPCI · Phytium
CPCI-6048 uses Phytium D2000 8-core processor and X100 bridge chip, onboard 16GB DDR4 memory, provides front rear I/O USB, display, network and serial I/O, supports Kylin OS, Debian and CentOS etc.system. Front panel and rear I/O respectively provides Gigabit Ethernet, USB, display and serial connect, facilitates arrangement operation end and cabinet routing. Board uses 6U module form, can combined with acquisition, communications and control module build measurement and control platform, suited to field equipment management and industrial data processing.
6U Phytium D2000 CompactPCI System Controller product photo
Product appearance reference; shipped units may differ.
Key features
Phytium D2000 8-core and X100 Onboard 16GB DDR4 64-bitCompactPCI bus
Front rear I/O Gigabit Ethernet and USB3.0 VGA, DP and composite industrial serial
Functions
EQIO
{{chapter}}
EQIO · CPCI-6048 Product Manual
{{page}} / {{pages}}
02 FUNCTIONS
Functions and engineering value
8-core and memory configured with selection
D2000 8-core processor together with X100 bridge chip, standard onboard 16GB DDR4, optional select 32GB particle solution. Industrial grade 2.0GHz and commercial grade 2.3GHz belongs to different processor configured with, purchasing and software verification should fixed actual version, not clock, memory and wide temperature upper limit arbitrarily combination.
Front rear I/O assign
Front panel and rear routing each provides Gigabit Ethernet and USB3.0, facilitates distinguish operation end and chassis internal device connection. Front I/O VGA and rear I/O DP handles display, front I/O RS-232 and rear I/O composite serial used for control equipment; composite serial must follow actual RS-232/422/485 mode check wiring.
CPCI compute node integrates
64-bit66MHz CompactPCI bus used for connect match system module, 6U 4HP/8HP structure facilitates per chassis conditions selection. Kylin OS, Debian and CentOS solution required match ARM platform driver, peripherals compatible and system real-time should product bring-up in verification.
The functional notes explain the product’s role from published configuration. Optional functions, software and peripherals follow the project definition. Chip capability is not the same as implemented I/O.
Architecture
EQIO
{{chapter}}
EQIO · CPCI-6048 Product Manual
{{page}} / {{pages}}
03 ARCHITECTURE
Platform and functional relationships
Functional block diagram
Only published functional relationship; composite serial, memory and clock temperature solution respectively confirm, rear I/O must match used backplane and RTM.
Platform and I/O
D2000 8-core ARM platform and X100 graphics expansion, onboard DDR4 consists of 6U CPCI controller. Product front rear Gigabit, USB, display and serial role split layout, processor frequency, 16GB or optional 32GB memory and temperature etc.grade all belongs to required stated delivery configured with, system and driver must match ARM architecture.
Reading the diagram Solid lines show published functional relationships, not on-board buses, bridge chips or connector pins. Optional controllers, radios, storage and software follow the configuration and interface files.
SPECIFICATIONS
EQIO
{{chapter}}
EQIO · CPCI-6048 Product Manual
{{page}} / {{pages}}
04 SPECIFICATIONS
Technical specifications
Compiled from published product data. Batch, I/O and environmental ratings follow the order confirmation.
Core system
| CPU | Phytium Tengrui D2000 8-core processor, industrial grade clock 2.0GHz, commercial grade 2.3GHz, PCH:X100 bridge chip |
|---|---|
| Bus | PCI64Bit/66MHZ bus, 3.3V/5V general-purpose voltage (I/O) |
| System memory | Onboard 16GB DDR4 (optional select 32G in port particle) |
| PICMG standard | PICMG®R2.0 CompactPCI®specification R3.0, PICMG®R2.16 CompactPCI®specification R1.0 |
| Operating system | Debian 9, Centos 7.5, Kylin OS V10 |
I/O and expansion
| USB | Front panel supports 2 USB3.0 I/O, 2 USB3.0 connect to rear wiring board |
|---|---|
| Display | Graphics processor: X100 integrates GPU, front panel supports 1 VGA I/O, 1 DisplayPort connect to rear wiring board |
| Serial | 1 RS-232 I/O, position to front panel, 1 RS-232/422/485 connect to rear wiring board |
| Network | Front panel 1-ch Gigabit Ethernet, rear routing 1-ch Gigabit Ethernet |
| Audio | HD Audio signal connect to rear wiring board |
Environmental conditions
| Operating temperature | Operating temperature: 0℃~55℃ (commercial temperature), -40°C~85℃ (wide temperature) storage temperature: -55℃ ~ 85℃ |
|---|---|
| Humidity | 40℃@95%, relative humidity, non-condensing |
Mechanical specifications and system requirements
| Specification | 6U 4HP/8HP CompactPCI®, dimensions 233.3mm × 160mm |
|---|
COMPONENTS
EQIO
{{chapter}}
EQIO · CPCI-6048 Product Manual
{{page}} / {{pages}}
05 COMPONENTS
Processor and device specifications
Device figures come from vendor publications and describe the chip or module. The implemented product follows the specification tables. Optional devices are supplied with the selected configuration.
Phytium D2000
| Processor core count | 8-core |
|---|---|
| Processor micro architecture | FTC663 |
| ISA and actuation mode | ARMv8; supports ARM64 and ARM32 actuation mode |
| Up to clock | 2.3 GHz |
| Layer-2 cache | 8 MB |
| L3 cache | 4 MB |
| CPU memory controller | 2 DDR4 I/O |
| CPU PCIe resources | 34 lanes PCIe 3.0 |
| CPU network controller | 2 Gigabit Ethernet I/O |
| Other on-chip I/O | 1 × SD2.0, 4 × UART, 32 × GPIO, 4 × I2C, 1 × QSPI, 2 × general-purpose SPI, 3 × CAN, 2 × WDT, 16 × external interrupt |
Phytium D2000 (continued)
| Hardware virtualization | Supports |
|---|---|
| Floating-point and SIMD | Single/dual accuracy floating-point and ASIMD |
| Chip safety architecture | PSPA 1.0 |
Phytium X100 chipset
| Device role | Micro processor matching graphics and I/O expansion chip |
|---|---|
| GPU compute rated | 300 GFLOPS |
| Video de code | 4K@30fps; H.264/H.265, MPEG4, MPEG2 etc. |
| GPU memory supports upper limit | Up to 8GB |
| Display control I/O | 3 × DisplayPort1.4: including 2-ch up to 3840 × 2160@60Hz, additional 1-ch up to 1280 × 1024@60Hz |
| PCIe on | 1×PCIe3.0 x16 |
COMPONENTS
EQIO
{{chapter}}
EQIO · CPCI-6048 Product Manual
{{page}} / {{pages}}
05 COMPONENTS
Processor and device specifications (continued)
Phytium X100 chipset (continued)
| PCIe downlink | Vendor list 8-ch downlink connect: 2-chx2 and 6-chx1; including 2-chx1 and SATA3.0 multiplexed |
|---|---|
| Expansion I/O category | PCIe3.0, SATA3.0, USB3.1, SD/eMMC, NAND Flash, I2S audio |
| Other on-chip I/O | 2×SD/SDIO/eMMC、NAND、4×UART、96×GPIO、8×MIO、4×PWM、QSPI、2×SPI master、3×SMBus、2×CAN |
| Chip safety architecture | PSPA1.0 |
Sources: Phytium IT Co., Ltd., Phytium Tengrui D2000 high-performance desktop CPU; Phytium IT Co., Ltd., Phytium chipset X100.
Applications
EQIO
{{chapter}}
EQIO · CPCI-6048 Product Manual
{{page}} / {{pages}}
06 APPLICATIONS
From product capability to applications
Industrial measurement and control host
8-core platform can run data acquisition management, device communications and operator UI, CPCI bus connect specific acquisition and control module. Selection memory capacity rear, should per task and cache requirement verification software performance, front rear Gigabit and USB layout required and chassis internal routing together confirm.
Device communications and industrial gateway
Front rear 2-ch Gigabit can arrangement device network and management network, rear I/O composite serial connect corresponding field equipment, can used for industrial communications application. Routing, safety and protocol conversion function from software implements, actual network isolation and throughput required test, not can be 2-ch Ethernet port inferred already has complete gateway function.
Cabinet operation and equipment management
Front I/O VGA, USB and RS-232 facilitates local maintenance, rear I/O DP, USB and audio can connect cabinet internal UI equipment. Commercial temperature and wide temperature version should per field conditions selection, and check corresponding processor frequency and storage media configured with, avoid only selection board temperature and ignore system other component.
Integration checks
| Processor version | Industrial grade D2000 2.0GHz, commercial grade 2.3GHz; confirm and temperature version, cooling and firmware combination. |
|---|---|
| Memory option | Onboard 16GB basic configured with, 32GB optional particle solution, required stated actual capacity and required system image. |
| I/O mode | Front rear each 1-ch Gigabit and 2-ch USB3.0; rear I/O RS-232/422/485 per mode used, check RTM wiring. |
| Environment and backplane | Commercial temperature 0–55℃ and wide temperature−40–85℃separate selection; confirm 64-bit66MHz bus, voltage, 4HP/8HP and rear I/O. |
Configuration
EQIO
{{chapter}}
EQIO · CPCI-6048 Product Manual
{{page}} / {{pages}}
07 CONFIGURATION
Appearance, configuration and selection
6U Phytium D2000 CompactPCI System Controller multi-angle reference
Multi-angle reference (generated from product photos); shipped units may differ.
Configuration
Optional select 32GB memory and different temperature solution, provides Kylin OS, Debian and CentOS system supports.
| Temperature version | Commercial temperature 0~55℃ / wide temperature-40~85℃; different version |
|---|---|
| Memory | 16GB; optional 32GB particle solution |
Selection guide
| Order confirmation | Batch, I/O and environmental ratings follow the order confirmation |
|---|---|
| Published data | Compiled from published product data; EQIO provides selection and system integration |
| Configuration talk | Share the application, I/O count, environment and software so a configuration can be proposed |
Request a quotation and selection support
Email lyping@eqio.com Phone +86 182 8191 2988 Web eqio.com
Brand
EQIO · CPCI-6048 Product Manual
{{page}} / {{pages}}
EQIO Easy Quick Input Output
BRAND
Measurement and control, made easy.
EQIO product family concept
EQIO product family · concept rendering
Brand story
EQIO builds measurement and control products and systems. The name stands for Easy Quick Input Output: Easy is a clear structure that is quick to learn, Quick is a direct path to efficient delivery, and Input / Output is every link between the device under test and the control system. The soft single-cycle wave inside the Q links the brand to signals, acquisition and I/O. “Measurement and control, made easy” is our promise for every selection, integration and delivery.
What we do
| Products | Data acquisition, test instruments, control and I/O, modular platforms, software, cables |
|---|---|
| Systems | Configured to the measurand, channels, accuracy and software, from design to commissioning |
| Support | Selection advice, training, maintenance and calibration |
How we deliver
| Requirements | |
|---|---|
| Solution design | |
| Build & integration | |
| Factory test | |
| Delivery & training | |
| Ongoing support |
Email lyping@eqio.com Phone +86 182 8191 2988 Web EQIO.COM
官方參考資料
Phytium IT Co., Ltd. · Phytium Tengrui D2000 high-performance desktop CPU