eCatHub
Todos os catálogos

CPCI-6048 6U Phytium D2000 CompactPCI System Controller · Product Manual

EQIO CPCI-6048 6U Phytium D2000 CompactPCI System Controller: Uses Phytium D2000 8-core processor and X100 bridge chip, onboard 16GB DDR4 memory, provides front rear I/O USB, display, network and serial I/O, supports Kylin

Publicado por: eqio · Licença de reutilização: All rights reserved

O idioma da interface não altera o conteúdo original do catálogo.

Ver PDF · Baixar PDF

Cover

EQIO

CPCI-6048

PRODUCT MANUAL

6U Phytium D2000 CompactPCI System Controller

Phytium D2000 8-core processor

Appearance reference (generated from product photos); shipped units may differ.

Measurement and control, made easy.

Easy · Quick · Input · Output

EQIO.COM

Overview

EQIO

{{chapter}}

EQIO · CPCI-6048 Product Manual

{{page}} / {{pages}}

01 OVERVIEW

6U Phytium D2000 CompactPCI System Controller

CPCI system controller · Industrial measurement and control · Network safety equipment · Industrial gateway · CompactPCI · Phytium

CPCI-6048 uses Phytium D2000 8-core processor and X100 bridge chip, onboard 16GB DDR4 memory, provides front rear I/O USB, display, network and serial I/O, supports Kylin OS, Debian and CentOS etc.system. Front panel and rear I/O respectively provides Gigabit Ethernet, USB, display and serial connect, facilitates arrangement operation end and cabinet routing. Board uses 6U module form, can combined with acquisition, communications and control module build measurement and control platform, suited to field equipment management and industrial data processing.

6U Phytium D2000 CompactPCI System Controller product photo

Product appearance reference; shipped units may differ.

Key features

Phytium D2000 8-core and X100 Onboard 16GB DDR4 64-bitCompactPCI bus

Front rear I/O Gigabit Ethernet and USB3.0 VGA, DP and composite industrial serial

Functions

EQIO

{{chapter}}

EQIO · CPCI-6048 Product Manual

{{page}} / {{pages}}

02 FUNCTIONS

Functions and engineering value

8-core and memory configured with selection

D2000 8-core processor together with X100 bridge chip, standard onboard 16GB DDR4, optional select 32GB particle solution. Industrial grade 2.0GHz and commercial grade 2.3GHz belongs to different processor configured with, purchasing and software verification should fixed actual version, not clock, memory and wide temperature upper limit arbitrarily combination.

Front rear I/O assign

Front panel and rear routing each provides Gigabit Ethernet and USB3.0, facilitates distinguish operation end and chassis internal device connection. Front I/O VGA and rear I/O DP handles display, front I/O RS-232 and rear I/O composite serial used for control equipment; composite serial must follow actual RS-232/422/485 mode check wiring.

CPCI compute node integrates

64-bit66MHz CompactPCI bus used for connect match system module, 6U 4HP/8HP structure facilitates per chassis conditions selection. Kylin OS, Debian and CentOS solution required match ARM platform driver, peripherals compatible and system real-time should product bring-up in verification.

The functional notes explain the product’s role from published configuration. Optional functions, software and peripherals follow the project definition. Chip capability is not the same as implemented I/O.

Architecture

EQIO

{{chapter}}

EQIO · CPCI-6048 Product Manual

{{page}} / {{pages}}

03 ARCHITECTURE

Platform and functional relationships

Functional block diagram

Only published functional relationship; composite serial, memory and clock temperature solution respectively confirm, rear I/O must match used backplane and RTM.

Platform and I/O

D2000 8-core ARM platform and X100 graphics expansion, onboard DDR4 consists of 6U CPCI controller. Product front rear Gigabit, USB, display and serial role split layout, processor frequency, 16GB or optional 32GB memory and temperature etc.grade all belongs to required stated delivery configured with, system and driver must match ARM architecture.

Reading the diagram Solid lines show published functional relationships, not on-board buses, bridge chips or connector pins. Optional controllers, radios, storage and software follow the configuration and interface files.

SPECIFICATIONS

EQIO

{{chapter}}

EQIO · CPCI-6048 Product Manual

{{page}} / {{pages}}

04 SPECIFICATIONS

Technical specifications

Compiled from published product data. Batch, I/O and environmental ratings follow the order confirmation.

Core system

CPUPhytium Tengrui D2000 8-core processor, industrial grade clock 2.0GHz, commercial grade 2.3GHz, PCH:X100 bridge chip
BusPCI64Bit/66MHZ bus, 3.3V/5V general-purpose voltage (I/O)
System memoryOnboard 16GB DDR4 (optional select 32G in port particle)
PICMG standardPICMG®R2.0 CompactPCI®specification R3.0, PICMG®R2.16 CompactPCI®specification R1.0
Operating systemDebian 9, Centos 7.5, Kylin OS V10

I/O and expansion

USBFront panel supports 2 USB3.0 I/O, 2 USB3.0 connect to rear wiring board
DisplayGraphics processor: X100 integrates GPU, front panel supports 1 VGA I/O, 1 DisplayPort connect to rear wiring board
Serial1 RS-232 I/O, position to front panel, 1 RS-232/422/485 connect to rear wiring board
NetworkFront panel 1-ch Gigabit Ethernet, rear routing 1-ch Gigabit Ethernet
AudioHD Audio signal connect to rear wiring board

Environmental conditions

Operating temperatureOperating temperature: 0℃~55℃ (commercial temperature), -40°C~85℃ (wide temperature) storage temperature: -55℃ ~ 85℃
Humidity40℃@95%, relative humidity, non-condensing

Mechanical specifications and system requirements

Specification6U 4HP/8HP CompactPCI®, dimensions 233.3mm × 160mm

COMPONENTS

EQIO

{{chapter}}

EQIO · CPCI-6048 Product Manual

{{page}} / {{pages}}

05 COMPONENTS

Processor and device specifications

Device figures come from vendor publications and describe the chip or module. The implemented product follows the specification tables. Optional devices are supplied with the selected configuration.

Phytium D2000

Processor core count8-core
Processor micro architectureFTC663
ISA and actuation modeARMv8; supports ARM64 and ARM32 actuation mode
Up to clock2.3 GHz
Layer-2 cache8 MB
L3 cache4 MB
CPU memory controller2 DDR4 I/O
CPU PCIe resources34 lanes PCIe 3.0
CPU network controller2 Gigabit Ethernet I/O
Other on-chip I/O1 × SD2.0, 4 × UART, 32 × GPIO, 4 × I2C, 1 × QSPI, 2 × general-purpose SPI, 3 × CAN, 2 × WDT, 16 × external interrupt

Phytium D2000 (continued)

Hardware virtualizationSupports
Floating-point and SIMDSingle/dual accuracy floating-point and ASIMD
Chip safety architecturePSPA 1.0

Phytium X100 chipset

Device roleMicro processor matching graphics and I/O expansion chip
GPU compute rated300 GFLOPS
Video de code4K@30fps; H.264/H.265, MPEG4, MPEG2 etc.
GPU memory supports upper limitUp to 8GB
Display control I/O3 × DisplayPort1.4: including 2-ch up to 3840 × 2160@60Hz, additional 1-ch up to 1280 × 1024@60Hz
PCIe on1×PCIe3.0 x16

COMPONENTS

EQIO

{{chapter}}

EQIO · CPCI-6048 Product Manual

{{page}} / {{pages}}

05 COMPONENTS

Processor and device specifications (continued)

Phytium X100 chipset (continued)

PCIe downlinkVendor list 8-ch downlink connect: 2-chx2 and 6-chx1; including 2-chx1 and SATA3.0 multiplexed
Expansion I/O categoryPCIe3.0, SATA3.0, USB3.1, SD/eMMC, NAND Flash, I2S audio
Other on-chip I/O2×SD/SDIO/eMMC、NAND、4×UART、96×GPIO、8×MIO、4×PWM、QSPI、2×SPI master、3×SMBus、2×CAN
Chip safety architecturePSPA1.0

Sources: Phytium IT Co., Ltd., Phytium Tengrui D2000 high-performance desktop CPU; Phytium IT Co., Ltd., Phytium chipset X100.

Applications

EQIO

{{chapter}}

EQIO · CPCI-6048 Product Manual

{{page}} / {{pages}}

06 APPLICATIONS

From product capability to applications

Industrial measurement and control host

8-core platform can run data acquisition management, device communications and operator UI, CPCI bus connect specific acquisition and control module. Selection memory capacity rear, should per task and cache requirement verification software performance, front rear Gigabit and USB layout required and chassis internal routing together confirm.

Device communications and industrial gateway

Front rear 2-ch Gigabit can arrangement device network and management network, rear I/O composite serial connect corresponding field equipment, can used for industrial communications application. Routing, safety and protocol conversion function from software implements, actual network isolation and throughput required test, not can be 2-ch Ethernet port inferred already has complete gateway function.

Cabinet operation and equipment management

Front I/O VGA, USB and RS-232 facilitates local maintenance, rear I/O DP, USB and audio can connect cabinet internal UI equipment. Commercial temperature and wide temperature version should per field conditions selection, and check corresponding processor frequency and storage media configured with, avoid only selection board temperature and ignore system other component.

Integration checks

Processor versionIndustrial grade D2000 2.0GHz, commercial grade 2.3GHz; confirm and temperature version, cooling and firmware combination.
Memory optionOnboard 16GB basic configured with, 32GB optional particle solution, required stated actual capacity and required system image.
I/O modeFront rear each 1-ch Gigabit and 2-ch USB3.0; rear I/O RS-232/422/485 per mode used, check RTM wiring.
Environment and backplaneCommercial temperature 0–55℃ and wide temperature−40–85℃separate selection; confirm 64-bit66MHz bus, voltage, 4HP/8HP and rear I/O.

Configuration

EQIO

{{chapter}}

EQIO · CPCI-6048 Product Manual

{{page}} / {{pages}}

07 CONFIGURATION

Appearance, configuration and selection

6U Phytium D2000 CompactPCI System Controller multi-angle reference

Multi-angle reference (generated from product photos); shipped units may differ.

Configuration

Optional select 32GB memory and different temperature solution, provides Kylin OS, Debian and CentOS system supports.

Temperature versionCommercial temperature 0~55℃ / wide temperature-40~85℃; different version
Memory16GB; optional 32GB particle solution

Selection guide

Order confirmationBatch, I/O and environmental ratings follow the order confirmation
Published dataCompiled from published product data; EQIO provides selection and system integration
Configuration talkShare the application, I/O count, environment and software so a configuration can be proposed

Request a quotation and selection support

Email lyping@eqio.com Phone +86 182 8191 2988 Web eqio.com

Brand

EQIO · CPCI-6048 Product Manual

{{page}} / {{pages}}

EQIO Easy Quick Input Output

BRAND

Measurement and control, made easy.

EQIO product family concept

EQIO product family · concept rendering

Brand story

EQIO builds measurement and control products and systems. The name stands for Easy Quick Input Output: Easy is a clear structure that is quick to learn, Quick is a direct path to efficient delivery, and Input / Output is every link between the device under test and the control system. The soft single-cycle wave inside the Q links the brand to signals, acquisition and I/O. “Measurement and control, made easy” is our promise for every selection, integration and delivery.

What we do

ProductsData acquisition, test instruments, control and I/O, modular platforms, software, cables
SystemsConfigured to the measurand, channels, accuracy and software, from design to commissioning
SupportSelection advice, training, maintenance and calibration

How we deliver

Requirements
Solution design
Build & integration
Factory test
Delivery & training
Ongoing support

Email lyping@eqio.com Phone +86 182 8191 2988 Web EQIO.COM

Fontes oficiais

EQIO CPCI-6048 product page

Phytium IT Co., Ltd. · Phytium Tengrui D2000 high-performance desktop CPU

Phytium IT Co., Ltd. · Phytium chipset X100

EQIO — About us