eCatHub
Tüm kataloglar

COMe-E2000 Phytium E2000 COM Express Type 10 Module · Product Manual

EQIO COMe-E2000 Phytium E2000 COM Express Type 10 Module: Uses Phytium E2000 4-core processor, supports up to 8GB soldered DDR4 memory, provides display, network, SATA, PCIe and industrial peripheral I/O, uses 84 × 55m

Yayınlayan: eqio · Yeniden kullanım lisansı: All rights reserved

Arayüz dili, kataloğun özgün içeriğini değiştirmez.

PDF görüntüle · PDF indir

Cover

EQIO

COMe-E2000

PRODUCT MANUAL

Phytium E2000 COM Express Type 10 Module

Phytium E2000 series 4-core processor

Appearance reference (generated from product photos); shipped units may differ.

Measurement and control, made easy.

Easy · Quick · Input · Output

EQIO.COM

Overview

EQIO

{{chapter}}

EQIO · COMe-E2000 Product Manual

{{page}} / {{pages}}

01 OVERVIEW

Phytium E2000 COM Express Type 10 Module

COM Express compute module · Embedded edge computing · Portable terminal · Industrial control · COM Express · Phytium

COMe-E2000 uses Phytium E2000 4-core processor, supports up to 8GB soldered DDR4 memory, provides display, network, SATA, PCIe and industrial peripheral I/O, uses 84 × 55mm compact module dimensions. HDMI, VGA, Gigabit Ethernet and GMAC facilitates organize display and communications, serial, GPIO and CAN suited to connect industrial peripherals. Module via carrier arrangement storage and expansion equipment, can used for compact controller, field acquisition node and HMI terminal. Facilitates installation.

Phytium E2000 COM Express Type 10 Module product photo

Multi-angle reference (generated from product photos); shipped units may differ.

Key features

Phytium E2000 4-core platform 84 × 55mm Type10 module Up to 8GB soldered DDR4

HDMI, VGA and Gigabit Ethernet PCIe3.0, SATA3.0 and CAN

Applications

Embedded edge computing
Portable terminal
Industrial control

Functions

EQIO

{{chapter}}

EQIO · COMe-E2000 Product Manual

{{page}} / {{pages}}

02 FUNCTIONS

Functions and engineering value

Small dimensions 4-core controller

84 × 55mm Type10 module integrates Phytium E2000 4-core processing platform and up to 8GB soldered DDR4, suited to compute resources embedded compact terminal. UEFI firmware responsible for boot environment, operating system and peripherals driver should and carrier one and adapts, not cannot only based on processor series determine software compatible.

Display and industrial signal connect

HDMI and VGA respectively provides digital and analog display path, 8-ch GPIO, 2-ch CAN and TTL serial can connect equipment control unit. 3-ch TTL in includes 1-ch CPU debug port, design application serial channel when needed single independent retain debug resources, avoid all serial all counted application I/O.

Storage and expansion per mode configured with

1-ch SATA3.0 used for connect external storage, PCIe3.0 x4 supports configured with into 4-ch x1, can per expansion equipment quantity and bandwidth requirement trade-off. Network resources includes Gigabit I/O and GMAC solution, HDA audio also requires via carrier expansion, connector configured with should module pins table based on.

The functional notes explain the product’s role from published configuration. Optional functions, software and peripherals follow the project definition. Chip capability is not the same as implemented I/O.

Architecture

EQIO

{{chapter}}

EQIO · COMe-E2000 Product Manual

{{page}} / {{pages}}

03 ARCHITECTURE

Compute platform and functional relationships

Functional block diagram

Show product functional relationship rather than internal topology; GMAC, HDA and TTL required carrier matching, PCIe mode and optional GMAC quantity respectively confirm.

Platform and I/O

E2000 series uses ARMv8 actuation architecture, this product used 4-core solution and configured with up to 8GB soldered DDR4. Module via Type10 connect toward carrier provides display, storage and industrial signal resources, including debug serial, GMAC and HDA each has independent purpose, must and can directly connect external equipment I/O distinguish.

Reading the diagram Solid lines show published functional relationships, not on-board buses, bridge chips or connector pins. Optional controllers, radios, storage and software follow the configuration and interface files.

SPECIFICATIONS

EQIO

{{chapter}}

EQIO · COMe-E2000 Product Manual

{{page}} / {{pages}}

04 SPECIFICATIONS

Technical specifications

Compiled from published product data. Batch, I/O and environmental ratings follow the order confirmation.

Core system

CPUPhytium E2000 series 4-core processor
System memorySoldered DDR4 memory, maximum 8GB
DisplayIntegrates graphics display
BIOSUEFI firmware

I/O and expansion

USB5-chUSB 2.0 I/O, 2-chUSB 3.0 I/O
DIO/MIO8-ch independent GPIO I/O, can configured with input or output, 2-chCAN 2.0 I/O
Serial3-chTTL serial, maximum baud rate supports 115200, including 1-chCPU debug serial
Display interfaces1-ch HDMI output, maximum resolution 3840*2160@30Hz, 1-ch VGA output, maximum resolution 1920*1080@60Hz
Network interfaces1-ch Gigabit Ethernet I/O, 1-chGMAC (optional 2-chGMAC)
Storage interfaces1-chSATA 3.0 I/O
Expansion slots1-chPCIe 3.0 × 4, supports configured with 4-chPCIe 3.0 × 1
Audio1-chHDA I/O, can via base plate expansion audio function

Environmental conditions

Operating temperature-40℃ ~ 85℃ (operating temperature), -40℃ ~ 85℃ (storage temperature)
Humidity5%~95%humidity non-condensing

Mechanical specifications and system requirements

Specification84mm×55mm

COMPONENTS

EQIO

{{chapter}}

EQIO · COMe-E2000 Product Manual

{{page}} / {{pages}}

05 COMPONENTS

Processor and device specifications

Device figures come from vendor publications and describe the chip or module. The implemented product follows the specification tables. Optional devices are supplied with the selected configuration.

Phytium E2000 series (Platform data)

ISA and actuation modeARMv8; supports ARM64 and ARM32
Hardware virtualizationSupports
Series memory controllerQ/D/S all 1 DDR4 I/O

Sources: Phytium IT Co., Ltd., Phytium Tenglong E2000 high-end embedded CPU.

Applications

EQIO

{{chapter}}

EQIO · COMe-E2000 Product Manual

{{page}} / {{pages}}

06 APPLICATIONS

From product capability to applications

Compact industrial controller

Type10 module embedded with CAN, GPIO and signal level conversion circuit dedicated carrier, can forms space limited equipment controller. 4-core compute responsible for protocol processing and application procedure, field switch amount and bus I/O isolated, protection and control response must be complete system design and verification.

Portable operation and display terminal

Module small dimensions and soldered memory suited to portable terminal internal layout, HDMI or VGA can connect operation display. Terminal battery management, input power and thermal design still requires single independent planning, must follow display specification, peripheral connection and software load verification product runtime and continuous run behaviour.

Edge acquisition and communications node

Via PCIe x4 or 4-ch x1 selected mode connect expansion equipment, and uses SATA save acquisition result, can build edge data processing node. Gigabit Ethernet and GMAC carrier resources facilitates arrangement communications path, actual acquisition throughput and parallel capability required combined with peripherals and driver test.

Integration checks

Module and carrierCheck 84 × 55mm Type10 connect definition, power and cooling structure; published the table does not gives complete power requirements, required separately confirm.
Serial purpose3-ch TTL including 1-ch CPU debug port; remaining channel connect RS-232/422/485 equipment when needed matching transceiver and protection circuit.
Expansion modePCIe x4 and 4-ch x1 per configured with selection; GMAC default 1-ch, 2-ch optional solution, not etc. To ready-made RJ45-port.
Display and environmentHDMI upper limit 3840 × 2160@30Hz, VGA1920 × 1080@60Hz; product verification−40–85℃operation conditions.

Configuration

EQIO

{{chapter}}

EQIO · COMe-E2000 Product Manual

{{page}} / {{pages}}

07 CONFIGURATION

Appearance, configuration and selection

Reference views

Phytium E2000 COM Express Type 10 Module appearance reference

Product appearance reference; shipped units may differ.

Configuration

Provides 1-ch Gigabit Ethernet and GMAC connect solution, HDA can via carrier expansion audio.

Selection guide

Order confirmationBatch, I/O and environmental ratings follow the order confirmation
Published dataCompiled from published product data; EQIO provides selection and system integration
Configuration talkShare the application, I/O count, environment and software so a configuration can be proposed

Request a quotation and selection support

Email lyping@eqio.com Phone +86 182 8191 2988 Web eqio.com

Brand

EQIO · COMe-E2000 Product Manual

{{page}} / {{pages}}

EQIO Easy Quick Input Output

BRAND

Measurement and control, made easy.

EQIO product family concept

EQIO product family · concept rendering

Brand story

EQIO builds measurement and control products and systems. The name stands for Easy Quick Input Output: Easy is a clear structure that is quick to learn, Quick is a direct path to efficient delivery, and Input / Output is every link between the device under test and the control system. The soft single-cycle wave inside the Q links the brand to signals, acquisition and I/O. “Measurement and control, made easy” is our promise for every selection, integration and delivery.

What we do

ProductsData acquisition, test instruments, control and I/O, modular platforms, software, cables
SystemsConfigured to the measurand, channels, accuracy and software, from design to commissioning
SupportSelection advice, training, maintenance and calibration

How we deliver

Requirements
Solution design
Build & integration
Factory test
Delivery & training
Ongoing support

Email lyping@eqio.com Phone +86 182 8191 2988 Web EQIO.COM

Resmî kaynaklar

EQIO COMe-E2000 product page

Phytium IT Co., Ltd. · Phytium Tenglong E2000 high-end embedded CPU

EQIO — About us