Cover
EQIO
COMe-E2000
PRODUCT MANUAL
Phytium E2000 COM Express Type 10 Module
Phytium E2000 series 4-core processor
Appearance reference (generated from product photos); shipped units may differ.
Measurement and control, made easy.
Easy · Quick · Input · Output
EQIO.COM
Overview
EQIO
{{chapter}}
EQIO · COMe-E2000 Product Manual
{{page}} / {{pages}}
01 OVERVIEW
Phytium E2000 COM Express Type 10 Module
COM Express compute module · Embedded edge computing · Portable terminal · Industrial control · COM Express · Phytium
COMe-E2000 uses Phytium E2000 4-core processor, supports up to 8GB soldered DDR4 memory, provides display, network, SATA, PCIe and industrial peripheral I/O, uses 84 × 55mm compact module dimensions. HDMI, VGA, Gigabit Ethernet and GMAC facilitates organize display and communications, serial, GPIO and CAN suited to connect industrial peripherals. Module via carrier arrangement storage and expansion equipment, can used for compact controller, field acquisition node and HMI terminal. Facilitates installation.
Phytium E2000 COM Express Type 10 Module product photo
Multi-angle reference (generated from product photos); shipped units may differ.
Key features
Phytium E2000 4-core platform 84 × 55mm Type10 module Up to 8GB soldered DDR4
HDMI, VGA and Gigabit Ethernet PCIe3.0, SATA3.0 and CAN
Applications
| Embedded edge computing | |
|---|---|
| Portable terminal | |
| Industrial control |
Functions
EQIO
{{chapter}}
EQIO · COMe-E2000 Product Manual
{{page}} / {{pages}}
02 FUNCTIONS
Functions and engineering value
Small dimensions 4-core controller
84 × 55mm Type10 module integrates Phytium E2000 4-core processing platform and up to 8GB soldered DDR4, suited to compute resources embedded compact terminal. UEFI firmware responsible for boot environment, operating system and peripherals driver should and carrier one and adapts, not cannot only based on processor series determine software compatible.
Display and industrial signal connect
HDMI and VGA respectively provides digital and analog display path, 8-ch GPIO, 2-ch CAN and TTL serial can connect equipment control unit. 3-ch TTL in includes 1-ch CPU debug port, design application serial channel when needed single independent retain debug resources, avoid all serial all counted application I/O.
Storage and expansion per mode configured with
1-ch SATA3.0 used for connect external storage, PCIe3.0 x4 supports configured with into 4-ch x1, can per expansion equipment quantity and bandwidth requirement trade-off. Network resources includes Gigabit I/O and GMAC solution, HDA audio also requires via carrier expansion, connector configured with should module pins table based on.
The functional notes explain the product’s role from published configuration. Optional functions, software and peripherals follow the project definition. Chip capability is not the same as implemented I/O.
Architecture
EQIO
{{chapter}}
EQIO · COMe-E2000 Product Manual
{{page}} / {{pages}}
03 ARCHITECTURE
Compute platform and functional relationships
Functional block diagram
Show product functional relationship rather than internal topology; GMAC, HDA and TTL required carrier matching, PCIe mode and optional GMAC quantity respectively confirm.
Platform and I/O
E2000 series uses ARMv8 actuation architecture, this product used 4-core solution and configured with up to 8GB soldered DDR4. Module via Type10 connect toward carrier provides display, storage and industrial signal resources, including debug serial, GMAC and HDA each has independent purpose, must and can directly connect external equipment I/O distinguish.
Reading the diagram Solid lines show published functional relationships, not on-board buses, bridge chips or connector pins. Optional controllers, radios, storage and software follow the configuration and interface files.
SPECIFICATIONS
EQIO
{{chapter}}
EQIO · COMe-E2000 Product Manual
{{page}} / {{pages}}
04 SPECIFICATIONS
Technical specifications
Compiled from published product data. Batch, I/O and environmental ratings follow the order confirmation.
Core system
| CPU | Phytium E2000 series 4-core processor |
|---|---|
| System memory | Soldered DDR4 memory, maximum 8GB |
| Display | Integrates graphics display |
| BIOS | UEFI firmware |
I/O and expansion
| USB | 5-chUSB 2.0 I/O, 2-chUSB 3.0 I/O |
|---|---|
| DIO/MIO | 8-ch independent GPIO I/O, can configured with input or output, 2-chCAN 2.0 I/O |
| Serial | 3-chTTL serial, maximum baud rate supports 115200, including 1-chCPU debug serial |
| Display interfaces | 1-ch HDMI output, maximum resolution 3840*2160@30Hz, 1-ch VGA output, maximum resolution 1920*1080@60Hz |
| Network interfaces | 1-ch Gigabit Ethernet I/O, 1-chGMAC (optional 2-chGMAC) |
| Storage interfaces | 1-chSATA 3.0 I/O |
| Expansion slots | 1-chPCIe 3.0 × 4, supports configured with 4-chPCIe 3.0 × 1 |
| Audio | 1-chHDA I/O, can via base plate expansion audio function |
Environmental conditions
| Operating temperature | -40℃ ~ 85℃ (operating temperature), -40℃ ~ 85℃ (storage temperature) |
|---|---|
| Humidity | 5%~95%humidity non-condensing |
Mechanical specifications and system requirements
| Specification | 84mm×55mm |
|---|
COMPONENTS
EQIO
{{chapter}}
EQIO · COMe-E2000 Product Manual
{{page}} / {{pages}}
05 COMPONENTS
Processor and device specifications
Device figures come from vendor publications and describe the chip or module. The implemented product follows the specification tables. Optional devices are supplied with the selected configuration.
Phytium E2000 series (Platform data)
| ISA and actuation mode | ARMv8; supports ARM64 and ARM32 |
|---|---|
| Hardware virtualization | Supports |
| Series memory controller | Q/D/S all 1 DDR4 I/O |
Sources: Phytium IT Co., Ltd., Phytium Tenglong E2000 high-end embedded CPU.
Applications
EQIO
{{chapter}}
EQIO · COMe-E2000 Product Manual
{{page}} / {{pages}}
06 APPLICATIONS
From product capability to applications
Compact industrial controller
Type10 module embedded with CAN, GPIO and signal level conversion circuit dedicated carrier, can forms space limited equipment controller. 4-core compute responsible for protocol processing and application procedure, field switch amount and bus I/O isolated, protection and control response must be complete system design and verification.
Portable operation and display terminal
Module small dimensions and soldered memory suited to portable terminal internal layout, HDMI or VGA can connect operation display. Terminal battery management, input power and thermal design still requires single independent planning, must follow display specification, peripheral connection and software load verification product runtime and continuous run behaviour.
Edge acquisition and communications node
Via PCIe x4 or 4-ch x1 selected mode connect expansion equipment, and uses SATA save acquisition result, can build edge data processing node. Gigabit Ethernet and GMAC carrier resources facilitates arrangement communications path, actual acquisition throughput and parallel capability required combined with peripherals and driver test.
Integration checks
| Module and carrier | Check 84 × 55mm Type10 connect definition, power and cooling structure; published the table does not gives complete power requirements, required separately confirm. |
|---|---|
| Serial purpose | 3-ch TTL including 1-ch CPU debug port; remaining channel connect RS-232/422/485 equipment when needed matching transceiver and protection circuit. |
| Expansion mode | PCIe x4 and 4-ch x1 per configured with selection; GMAC default 1-ch, 2-ch optional solution, not etc. To ready-made RJ45-port. |
| Display and environment | HDMI upper limit 3840 × 2160@30Hz, VGA1920 × 1080@60Hz; product verification−40–85℃operation conditions. |
Configuration
EQIO
{{chapter}}
EQIO · COMe-E2000 Product Manual
{{page}} / {{pages}}
07 CONFIGURATION
Appearance, configuration and selection
Reference views
Phytium E2000 COM Express Type 10 Module appearance reference
Product appearance reference; shipped units may differ.
Configuration
Provides 1-ch Gigabit Ethernet and GMAC connect solution, HDA can via carrier expansion audio.
Selection guide
| Order confirmation | Batch, I/O and environmental ratings follow the order confirmation |
|---|---|
| Published data | Compiled from published product data; EQIO provides selection and system integration |
| Configuration talk | Share the application, I/O count, environment and software so a configuration can be proposed |
Request a quotation and selection support
Email lyping@eqio.com Phone +86 182 8191 2988 Web eqio.com
Brand
EQIO · COMe-E2000 Product Manual
{{page}} / {{pages}}
EQIO Easy Quick Input Output
BRAND
Measurement and control, made easy.
EQIO product family concept
EQIO product family · concept rendering
Brand story
EQIO builds measurement and control products and systems. The name stands for Easy Quick Input Output: Easy is a clear structure that is quick to learn, Quick is a direct path to efficient delivery, and Input / Output is every link between the device under test and the control system. The soft single-cycle wave inside the Q links the brand to signals, acquisition and I/O. “Measurement and control, made easy” is our promise for every selection, integration and delivery.
What we do
| Products | Data acquisition, test instruments, control and I/O, modular platforms, software, cables |
|---|---|
| Systems | Configured to the measurand, channels, accuracy and software, from design to commissioning |
| Support | Selection advice, training, maintenance and calibration |
How we deliver
| Requirements | |
|---|---|
| Solution design | |
| Build & integration | |
| Factory test | |
| Delivery & training | |
| Ongoing support |
Email lyping@eqio.com Phone +86 182 8191 2988 Web EQIO.COM
Sources officielles
Phytium IT Co., Ltd. · Phytium Tenglong E2000 high-end embedded CPU