eCatHub
Todos os catálogos

COMe-2K1000 Loongson 2K1000 COM Express Module · Product Manual

EQIO COMe-2K1000 Loongson 2K1000 COM Express Module: Uses Loongson 2K1000 dual core processor and soldered DDR3 memory, provides display, USB, serial, GPIO, network, SATA and PCIe I/O, 84 × 55mm compact module for

Publicado por: eqio · Licença de reutilização: All rights reserved

O idioma da interface não altera o conteúdo original do catálogo.

Ver PDF · Baixar PDF

Cover

EQIO

COMe-2K1000

PRODUCT MANUAL

Loongson 2K1000 COM Express Module

Loongson 2K1000 series dual core processor

Appearance reference (generated from product photos); shipped units may differ.

Measurement and control, made easy.

Easy · Quick · Input · Output

EQIO.COM

Overview

EQIO

{{chapter}}

EQIO · COMe-2K1000 Product Manual

{{page}} / {{pages}}

01 OVERVIEW

Loongson 2K1000 COM Express Module

COM Express compute module · Industrial embedded control · Communications terminal · Low power edge computing · COM Express · Loongson

COMe-2K1000 uses Loongson 2K1000 dual core processor and soldered DDR3 memory, provides display, USB, serial, GPIO, network, SATA and PCIe I/O, 84 × 55mm compact module form used for embedded control and communications terminal. 4-ch TTL serial, 12-ch GPIO and USB can and external control device connection, DVO and LVDS facilitates organize display UI. Module equipped with PMON firmware, carrier carries storage and peripherals routing, suited to space limited industrial control and field data acquisition node.

Loongson 2K1000 COM Express Module product photo

Product appearance reference; shipped units may differ.

Key features

Loongson 2K1000 dual core platform Up to 4GB soldered DDR3 84 × 55mm compact module

4-ch TTL serial, 12-ch GPIO DVO, LVDS and Gigabit Ethernet

Functions

EQIO

{{chapter}}

EQIO · COMe-2K1000 Product Manual

{{page}} / {{pages}}

02 FUNCTIONS

Functions and engineering value

Dual core compact compute basic

Loongson 2K1000 dual core platform and up to 4GB soldered DDR3 integrates 84 × 55mm module internal, board-level clock 800MHz to 1GHz. PMON firmware and matching operating system forms equipment boot basic, suited to module method organize control application and communications task, and carrier retain I/O design space.

Serial and digital peripheral connection

4-ch TTL serial and 12-ch can configured with GPIO facilitates attach external control unit, including 1-ch TTL used for CPU debug. 4-ch USB2.0 in 1-ch supports OTG, can per peripheral connection direction planning used; serial signal level conversion, digital isolated and protection should carrier end completes.

Display and storage resources selection

DVO can from carrier conversion required display interfaces, additional has 24-bit single channel LVDS connect; these conversion form not should as at the same time storage multiple output. SATA2.0 and PCIe2.0 resources used for storage and expansion, onboard 4GB SPI NAND flash belongs to optional configuration.

The functional notes explain the product’s role from published configuration. Optional functions, software and peripherals follow the project definition. Chip capability is not the same as implemented I/O.

Architecture

EQIO

{{chapter}}

EQIO · COMe-2K1000 Product Manual

{{page}} / {{pages}}

03 ARCHITECTURE

Compute platform and functional relationships

Functional block diagram

According to module published specification drawn functional relationship; DVO conversion, GMAC and I/O signal level from carrier design determines, flash and link mode must follow configured with confirm.

Platform and I/O

This module Loongson 2K1000 dual core processor, soldered DDR3 and PMON firmware forms compute basic, via carrier organize display, network and industrial peripherals. Board-level memory upper limit 4GB, PCIe2.0 split, DVO conversion and optional flash belongs to different integrates selection, not cannot from module I/O list inferred all peripheral device already installation.

Reading the diagram Solid lines show published functional relationships, not on-board buses, bridge chips or connector pins. Optional controllers, radios, storage and software follow the configuration and interface files.

SPECIFICATIONS

EQIO

{{chapter}}

EQIO · COMe-2K1000 Product Manual

{{page}} / {{pages}}

04 SPECIFICATIONS

Technical specifications

Compiled from published product data. Batch, I/O and environmental ratings follow the order confirmation.

Core system

CPULoongson 2K1000 series dual core processor, board-level frequency 800MHz–1GHz
System memorySoldered DDR3 memory, maximum 4GB
DisplayIntegrates GPU2K1000
BIOSPMON firmware
Operating systemLoongnix, Kylin OS, UOS etc.

I/O and expansion

USB4-chUSB 2.0, including 1-chUSB 2.0 supports OTG function
GPIO12-chGPIO, can configured with input or output
Serial4-chTTL serial, maximum baud rate 115200bps, including 1-chCPU debug serial
Display interfaces1-chDVO supports base plate expansion DVI/HDMI/VGA/EDP, 1-ch24bit single channel LVDS, maximum resolution 1920*1080@60Hz
Network interfaces1-ch Gigabit Ethernet I/O, 1-chGMAC (optional 2-chGMAC)
Storage interfaces1-chSATA 2.0 I/O, onboard 4GB SPI NANDFLASH (optional)
Expansion slots4-chPCIe 2.0 × 1, supports configured with 1-chPCIe 2.0 × 4

Environmental conditions

Operating temperature-40℃ ~ 70℃ (operating temperature), -40℃ ~ 85℃ (storage temperature)
Humidity5%~95%humidity non-condensing

Mechanical specifications and system requirements

Specification84mm×55mm

Applications

EQIO

{{chapter}}

EQIO · COMe-2K1000 Product Manual

{{page}} / {{pages}}

05 APPLICATIONS

From product capability to applications

Equipment control and status panel

Module connect dedicated GPIO, serial transceiver unit and display carrier, can used for equipment parameters settings and run status show. LVDS or from DVO conversion display solution should based on display specification determine, application serial quantity required subtract debug port, and verification control protocol and UI load under stable run.

Industrial communications terminal

Uses Gigabit Ethernet and TTL serial organize network devices and serial terminal between application HMI, can used for industrial gateway or communications management node. GMAC requires carrier matching, software the side should combined with Loongnix, Kylin or UOS specific platform version verification driver and target application compatible.

Local data log node

Via SATA2.0 connect storage devices, combined with PCIe2.0 expansion resources can build with local logging capability acquisition node. Published specification not gives continuous write performance, actual task must follow sampling data amount, storage media and system load verification capacity and throughput, flash option also requires single independent confirm.

Integration checks

Platform software2K1000 platform software packaging must and should architecture and PMON boot method match, not reuse other Loongson architecture image.
Display conversionDVO to DVI/HDMI/VGA/eDP from carrier implements; LVDS single channel 24-bit, required check panel timing.
Resources trade-off4-ch PCIe2.0 x1 or 1-ch x4 per configured with selection; 4GB SPI NAND and 2-ch GMAC all per option confirm.
Serial and environment4-ch TTL including CPU debug port; check carrier signal level, −40–70℃operating temperature and 5%–95%non-condensing conditions.

Configuration

EQIO

{{chapter}}

EQIO · COMe-2K1000 Product Manual

{{page}} / {{pages}}

06 CONFIGURATION

Appearance, configuration and selection

Loongson 2K1000 COM Express Module multi-angle reference

Multi-angle reference (generated from product photos); shipped units may differ.

Configuration

Provides SATA2.0 and PCIe2.0 connect, supports optional onboard flash; USB I/O in 1-ch has OTG function.

Selection guide

Order confirmationBatch, I/O and environmental ratings follow the order confirmation
Published dataCompiled from published product data; EQIO provides selection and system integration
Configuration talkShare the application, I/O count, environment and software so a configuration can be proposed

Request a quotation and selection support

Email lyping@eqio.com Phone +86 182 8191 2988 Web eqio.com

Brand

EQIO · COMe-2K1000 Product Manual

{{page}} / {{pages}}

EQIO Easy Quick Input Output

BRAND

Measurement and control, made easy.

EQIO product family concept

EQIO product family · concept rendering

Brand story

EQIO builds measurement and control products and systems. The name stands for Easy Quick Input Output: Easy is a clear structure that is quick to learn, Quick is a direct path to efficient delivery, and Input / Output is every link between the device under test and the control system. The soft single-cycle wave inside the Q links the brand to signals, acquisition and I/O. “Measurement and control, made easy” is our promise for every selection, integration and delivery.

What we do

ProductsData acquisition, test instruments, control and I/O, modular platforms, software, cables
SystemsConfigured to the measurand, channels, accuracy and software, from design to commissioning
SupportSelection advice, training, maintenance and calibration

How we deliver

Requirements
Solution design
Build & integration
Factory test
Delivery & training
Ongoing support

Email lyping@eqio.com Phone +86 182 8191 2988 Web EQIO.COM

Fontes oficiais

EQIO COMe-2K1000 product page

EQIO — About us