Cover
EQIO
COMe-2K1000
PRODUCT MANUAL
Loongson 2K1000 COM Express Module
Loongson 2K1000 series dual core processor
Appearance reference (generated from product photos); shipped units may differ.
Measurement and control, made easy.
Easy · Quick · Input · Output
EQIO.COM
Overview
EQIO
{{chapter}}
EQIO · COMe-2K1000 Product Manual
{{page}} / {{pages}}
01 OVERVIEW
Loongson 2K1000 COM Express Module
COM Express compute module · Industrial embedded control · Communications terminal · Low power edge computing · COM Express · Loongson
COMe-2K1000 uses Loongson 2K1000 dual core processor and soldered DDR3 memory, provides display, USB, serial, GPIO, network, SATA and PCIe I/O, 84 × 55mm compact module form used for embedded control and communications terminal. 4-ch TTL serial, 12-ch GPIO and USB can and external control device connection, DVO and LVDS facilitates organize display UI. Module equipped with PMON firmware, carrier carries storage and peripherals routing, suited to space limited industrial control and field data acquisition node.
Loongson 2K1000 COM Express Module product photo
Product appearance reference; shipped units may differ.
Key features
Loongson 2K1000 dual core platform Up to 4GB soldered DDR3 84 × 55mm compact module
4-ch TTL serial, 12-ch GPIO DVO, LVDS and Gigabit Ethernet
Functions
EQIO
{{chapter}}
EQIO · COMe-2K1000 Product Manual
{{page}} / {{pages}}
02 FUNCTIONS
Functions and engineering value
Dual core compact compute basic
Loongson 2K1000 dual core platform and up to 4GB soldered DDR3 integrates 84 × 55mm module internal, board-level clock 800MHz to 1GHz. PMON firmware and matching operating system forms equipment boot basic, suited to module method organize control application and communications task, and carrier retain I/O design space.
Serial and digital peripheral connection
4-ch TTL serial and 12-ch can configured with GPIO facilitates attach external control unit, including 1-ch TTL used for CPU debug. 4-ch USB2.0 in 1-ch supports OTG, can per peripheral connection direction planning used; serial signal level conversion, digital isolated and protection should carrier end completes.
Display and storage resources selection
DVO can from carrier conversion required display interfaces, additional has 24-bit single channel LVDS connect; these conversion form not should as at the same time storage multiple output. SATA2.0 and PCIe2.0 resources used for storage and expansion, onboard 4GB SPI NAND flash belongs to optional configuration.
The functional notes explain the product’s role from published configuration. Optional functions, software and peripherals follow the project definition. Chip capability is not the same as implemented I/O.
Architecture
EQIO
{{chapter}}
EQIO · COMe-2K1000 Product Manual
{{page}} / {{pages}}
03 ARCHITECTURE
Compute platform and functional relationships
Functional block diagram
According to module published specification drawn functional relationship; DVO conversion, GMAC and I/O signal level from carrier design determines, flash and link mode must follow configured with confirm.
Platform and I/O
This module Loongson 2K1000 dual core processor, soldered DDR3 and PMON firmware forms compute basic, via carrier organize display, network and industrial peripherals. Board-level memory upper limit 4GB, PCIe2.0 split, DVO conversion and optional flash belongs to different integrates selection, not cannot from module I/O list inferred all peripheral device already installation.
Reading the diagram Solid lines show published functional relationships, not on-board buses, bridge chips or connector pins. Optional controllers, radios, storage and software follow the configuration and interface files.
SPECIFICATIONS
EQIO
{{chapter}}
EQIO · COMe-2K1000 Product Manual
{{page}} / {{pages}}
04 SPECIFICATIONS
Technical specifications
Compiled from published product data. Batch, I/O and environmental ratings follow the order confirmation.
Core system
| CPU | Loongson 2K1000 series dual core processor, board-level frequency 800MHz–1GHz |
|---|---|
| System memory | Soldered DDR3 memory, maximum 4GB |
| Display | Integrates GPU2K1000 |
| BIOS | PMON firmware |
| Operating system | Loongnix, Kylin OS, UOS etc. |
I/O and expansion
| USB | 4-chUSB 2.0, including 1-chUSB 2.0 supports OTG function |
|---|---|
| GPIO | 12-chGPIO, can configured with input or output |
| Serial | 4-chTTL serial, maximum baud rate 115200bps, including 1-chCPU debug serial |
| Display interfaces | 1-chDVO supports base plate expansion DVI/HDMI/VGA/EDP, 1-ch24bit single channel LVDS, maximum resolution 1920*1080@60Hz |
| Network interfaces | 1-ch Gigabit Ethernet I/O, 1-chGMAC (optional 2-chGMAC) |
| Storage interfaces | 1-chSATA 2.0 I/O, onboard 4GB SPI NANDFLASH (optional) |
| Expansion slots | 4-chPCIe 2.0 × 1, supports configured with 1-chPCIe 2.0 × 4 |
Environmental conditions
| Operating temperature | -40℃ ~ 70℃ (operating temperature), -40℃ ~ 85℃ (storage temperature) |
|---|---|
| Humidity | 5%~95%humidity non-condensing |
Mechanical specifications and system requirements
| Specification | 84mm×55mm |
|---|
Applications
EQIO
{{chapter}}
EQIO · COMe-2K1000 Product Manual
{{page}} / {{pages}}
05 APPLICATIONS
From product capability to applications
Equipment control and status panel
Module connect dedicated GPIO, serial transceiver unit and display carrier, can used for equipment parameters settings and run status show. LVDS or from DVO conversion display solution should based on display specification determine, application serial quantity required subtract debug port, and verification control protocol and UI load under stable run.
Industrial communications terminal
Uses Gigabit Ethernet and TTL serial organize network devices and serial terminal between application HMI, can used for industrial gateway or communications management node. GMAC requires carrier matching, software the side should combined with Loongnix, Kylin or UOS specific platform version verification driver and target application compatible.
Local data log node
Via SATA2.0 connect storage devices, combined with PCIe2.0 expansion resources can build with local logging capability acquisition node. Published specification not gives continuous write performance, actual task must follow sampling data amount, storage media and system load verification capacity and throughput, flash option also requires single independent confirm.
Integration checks
| Platform software | 2K1000 platform software packaging must and should architecture and PMON boot method match, not reuse other Loongson architecture image. |
|---|---|
| Display conversion | DVO to DVI/HDMI/VGA/eDP from carrier implements; LVDS single channel 24-bit, required check panel timing. |
| Resources trade-off | 4-ch PCIe2.0 x1 or 1-ch x4 per configured with selection; 4GB SPI NAND and 2-ch GMAC all per option confirm. |
| Serial and environment | 4-ch TTL including CPU debug port; check carrier signal level, −40–70℃operating temperature and 5%–95%non-condensing conditions. |
Configuration
EQIO
{{chapter}}
EQIO · COMe-2K1000 Product Manual
{{page}} / {{pages}}
06 CONFIGURATION
Appearance, configuration and selection
Loongson 2K1000 COM Express Module multi-angle reference
Multi-angle reference (generated from product photos); shipped units may differ.
Configuration
Provides SATA2.0 and PCIe2.0 connect, supports optional onboard flash; USB I/O in 1-ch has OTG function.
Selection guide
| Order confirmation | Batch, I/O and environmental ratings follow the order confirmation |
|---|---|
| Published data | Compiled from published product data; EQIO provides selection and system integration |
| Configuration talk | Share the application, I/O count, environment and software so a configuration can be proposed |
Request a quotation and selection support
Email lyping@eqio.com Phone +86 182 8191 2988 Web eqio.com
Brand
EQIO · COMe-2K1000 Product Manual
{{page}} / {{pages}}
EQIO Easy Quick Input Output
BRAND
Measurement and control, made easy.
EQIO product family concept
EQIO product family · concept rendering
Brand story
EQIO builds measurement and control products and systems. The name stands for Easy Quick Input Output: Easy is a clear structure that is quick to learn, Quick is a direct path to efficient delivery, and Input / Output is every link between the device under test and the control system. The soft single-cycle wave inside the Q links the brand to signals, acquisition and I/O. “Measurement and control, made easy” is our promise for every selection, integration and delivery.
What we do
| Products | Data acquisition, test instruments, control and I/O, modular platforms, software, cables |
|---|---|
| Systems | Configured to the measurand, channels, accuracy and software, from design to commissioning |
| Support | Selection advice, training, maintenance and calibration |
How we deliver
| Requirements | |
|---|---|
| Solution design | |
| Build & integration | |
| Factory test | |
| Delivery & training | |
| Ongoing support |
Email lyping@eqio.com Phone +86 182 8191 2988 Web EQIO.COM