eCatHub
모든 카탈로그

VPX-2507 3U VPX Gigabit Ethernet Switch Card · Product Manual

EQIO VPX-2507 3U VPX Gigabit Ethernet Switch Card: Provides 4-ch front panel Gigabit port and 1-ch backplane network connect, supports 10/100/1000Mbps adaptive, layer-2 storage forwarding and 9K jumbo frame, use

게시자: eqio · 재사용 라이선스: All rights reserved

인터페이스 언어를 바꿔도 카탈로그 원문은 변경되지 않습니다.

PDF 보기 · PDF 다운로드

Cover

EQIO

VPX-2507

PRODUCT MANUAL

3U VPX Gigabit Ethernet Switch Card

VPX communications and IO card · Industr…

Appearance reference (generated from product photos); shipped units may differ.

Measurement and control, made easy.

Easy · Quick · Input · Output

EQIO.COM

Overview

EQIO

{{chapter}}

EQIO · VPX-2507 Product Manual

{{page}} / {{pages}}

01 OVERVIEW

3U VPX Gigabit Ethernet Switch Card

VPX communications and IO card · Industrial control · Vehicle-mounted platform · Network data switch · VPX

VPX-2507 provides 4-ch front panel Gigabit port and 1-ch backplane network connect, supports 10/100/1000Mbps adaptive, layer-2 storage forwarding and 9K jumbo frame, used for VPX system internal network interconnect. 4-ch RJ45 can connect chassis external equipment, backplane link used for controller and internal network interconnect, port mode can via switch code selection. Single 12V power and 3U board outline facilitates integrates, suited to modular acquisition system, communications node and industrial equipment networking.

3U VPX Gigabit Ethernet Switch Card product photo

Product appearance reference; shipped units may differ.

Key features

4-ch front panel Gigabit RJ45 1-ch backplane 1000BASE-T Layer-2 storage forwarding switch

10/100/1000Mbps adaptive Supports 9K byte jumbo frame

Functions

EQIO

{{chapter}}

EQIO · VPX-2507 Product Manual

{{page}} / {{pages}}

02 FUNCTIONS

Functions and engineering value

Chassis internal and external network interconnect

Switch card via 4-ch front panel RJ45 and 1-ch backplane network connect, external equipment and chassis internal control node include the same layer-2 connect solution. Each port supports 10/100/1000Mbps adaptive, port purpose and switch code settings should per actual system planning, board outline consistent and not indicates backplane pinout general-purpose.

Layer-2 storage forwarding

Product uses storage forwarding method, each network node etc.switch, and lists 9K byte jumbo frame supports. Whether used jumbo frame should and communications endpoint and link settings keep consistent, not cannot only enable switch card one side; published data not gives full port and throughput, should actual packet test evaluate system behaviour.

Single power modular integrates

12V single power, 160 × 100mm board outline facilitates 3U VPX chassis in layout network connect, maximum power consumption rated not high to 30W. Design when needed backplane power, product cooling and cables space together arrangement, 0–50℃operation range not can reuse other wide temperature board environment etc.grade.

The functional notes explain the product’s role from published configuration. Optional functions, software and peripherals follow the project definition. Chip capability is not the same as implemented I/O.

Architecture

EQIO

{{chapter}}

EQIO · VPX-2507 Product Manual

{{page}} / {{pages}}

03 ARCHITECTURE

Signal and functional relationships

Functional block diagram

Only express network port and forwarding functional relationship, not indicates switch chip internal structure; connect dual toward communications, jumbo frame and stream amount capability requires the end to end verification.

Platform and I/O

This board layer-2 network storage forwarding core, provides front panel 4-ch RJ45 and 1-ch backplane 1000BASE-T connect. Published data not gives switch chip or CPU model, block diagram only note port, power and forwarding functional relationship, 9K jumbo frame, switch code mode and stream quantity requires actual network in verification.

Reading the diagram Solid lines show published functional relationships, not on-board buses, bridge chips or connector pins. Optional controllers, radios, storage and software follow the configuration and interface files.

SPECIFICATIONS

EQIO

{{chapter}}

EQIO · VPX-2507 Product Manual

{{page}} / {{pages}}

04 SPECIFICATIONS

Technical specifications

Compiled from published product data. Batch, I/O and environmental ratings follow the order confirmation.

Technical data

Power+12V (single power power)
Transmission speed10/100/1000MbpS, supports 9K byte jumbo frame
Switch methodStorage forwarding, each network node etc.switch
Transmission modeFull dual industrial /half dual industrial adaptive
Application levelLayer-2
Power consumption≤ 30W
Operating systemLinux (Ubuntu/CentOS), Windows (driver supports)
Can reliabilityCan reliability: MTBF30000h, maintenance: MTIR30min
Connector type1-ch 1000BASE-T I/O via T connector connect to backplane 4-ch 1000BASE-T I/O via standard RJ45 connector connect to baffle (can via switch code switch switch)

Environmental conditions

Operating temperature0~50℃
Relative humidity95%non-condensing
Storage temperature-20℃~65℃

Mechanical specifications and system requirements

Specification160mm × 100mm (0pen VPX3U standard), weight ≤ 500g (typical value, not including heatsink)

Applications

EQIO

{{chapter}}

EQIO · VPX-2507 Product Manual

{{page}} / {{pages}}

05 APPLICATIONS

From product capability to applications

Industrial equipment local-area interconnect

4-ch RJ45 can connect equipment, maintenance terminal or control unit, backplane link connect chassis internal controller, forms compact network attach solution. System required stated each equipment address and application stream amount, routing, network safety or remote management function should be matching equipment and software provides, not can be layer-2 switch capability automatic inferred.

Modular acquisition system networked

As multiple acquisition equipment via Ethernet transfer data when, can used switch card aggregation to VPX controller network path. Requires based on each equipment continuous stream amount evaluate on link load, and test end to end loss pack and buffer; 4 Gigabit port not represent single item backplane link has four times Gigabit bandwidth.

Mobile equipment internal communications

To installation space limited mobile equipment, can uses 3U board organize chassis internal and external network wiring, reduce spread switch equipment layout. Whether suited to specific vehicle-mounted operating condition still requires check temperature, vibration, power and connector requirements, product 0–50℃operation range should be treated as selection boundary.

Integration checks

Backplane linkConfirm 1-ch 1000BASE-T via T connector to backplane pinout definition, match chassis controller and backplane network resources.
Port mode4-ch front panel RJ45 and switch code switch per delivery note settings; jumbo frame requires the end point and whole link together supports.
Stream amount budgetPer backplane on and port actual stream amount evaluate and capability, not each port rated rate add as host can used throughput.
Power and environment12V input, power consumption≤30W; check 160 × 100mm installation and 0–50℃operation conditions, separately confirm vehicle-mounted environment requirements.

Configuration

EQIO

{{chapter}}

EQIO · VPX-2507 Product Manual

{{page}} / {{pages}}

06 CONFIGURATION

Appearance, configuration and selection

3U VPX Gigabit Ethernet Switch Card multi-angle reference

Multi-angle reference (generated from product photos); shipped units may differ.

Configuration

Uses 12V single power input, board dimensions 160 × 100mm, operating temperature 0–50℃.

Selection guide

Order confirmationBatch, I/O and environmental ratings follow the order confirmation
Published dataCompiled from published product data; EQIO provides selection and system integration
Configuration talkShare the application, I/O count, environment and software so a configuration can be proposed

Request a quotation and selection support

Email lyping@eqio.com Phone +86 182 8191 2988 Web eqio.com

Brand

EQIO · VPX-2507 Product Manual

{{page}} / {{pages}}

EQIO Easy Quick Input Output

BRAND

Measurement and control, made easy.

EQIO product family concept

EQIO product family · concept rendering

Brand story

EQIO builds measurement and control products and systems. The name stands for Easy Quick Input Output: Easy is a clear structure that is quick to learn, Quick is a direct path to efficient delivery, and Input / Output is every link between the device under test and the control system. The soft single-cycle wave inside the Q links the brand to signals, acquisition and I/O. “Measurement and control, made easy” is our promise for every selection, integration and delivery.

What we do

ProductsData acquisition, test instruments, control and I/O, modular platforms, software, cables
SystemsConfigured to the measurand, channels, accuracy and software, from design to commissioning
SupportSelection advice, training, maintenance and calibration

How we deliver

Requirements
Solution design
Build & integration
Factory test
Delivery & training
Ongoing support

Email lyping@eqio.com Phone +86 182 8191 2988 Web EQIO.COM

공식 참고 자료

EQIO VPX-2507 product page

EQIO — About us