Cover
EQIO
VPX-2507
PRODUCT MANUAL
3U VPX Gigabit Ethernet Switch Card
VPX communications and IO card · Industr…
Appearance reference (generated from product photos); shipped units may differ.
Measurement and control, made easy.
Easy · Quick · Input · Output
EQIO.COM
Overview
EQIO
{{chapter}}
EQIO · VPX-2507 Product Manual
{{page}} / {{pages}}
01 OVERVIEW
3U VPX Gigabit Ethernet Switch Card
VPX communications and IO card · Industrial control · Vehicle-mounted platform · Network data switch · VPX
VPX-2507 provides 4-ch front panel Gigabit port and 1-ch backplane network connect, supports 10/100/1000Mbps adaptive, layer-2 storage forwarding and 9K jumbo frame, used for VPX system internal network interconnect. 4-ch RJ45 can connect chassis external equipment, backplane link used for controller and internal network interconnect, port mode can via switch code selection. Single 12V power and 3U board outline facilitates integrates, suited to modular acquisition system, communications node and industrial equipment networking.
3U VPX Gigabit Ethernet Switch Card product photo
Product appearance reference; shipped units may differ.
Key features
4-ch front panel Gigabit RJ45 1-ch backplane 1000BASE-T Layer-2 storage forwarding switch
10/100/1000Mbps adaptive Supports 9K byte jumbo frame
Functions
EQIO
{{chapter}}
EQIO · VPX-2507 Product Manual
{{page}} / {{pages}}
02 FUNCTIONS
Functions and engineering value
Chassis internal and external network interconnect
Switch card via 4-ch front panel RJ45 and 1-ch backplane network connect, external equipment and chassis internal control node include the same layer-2 connect solution. Each port supports 10/100/1000Mbps adaptive, port purpose and switch code settings should per actual system planning, board outline consistent and not indicates backplane pinout general-purpose.
Layer-2 storage forwarding
Product uses storage forwarding method, each network node etc.switch, and lists 9K byte jumbo frame supports. Whether used jumbo frame should and communications endpoint and link settings keep consistent, not cannot only enable switch card one side; published data not gives full port and throughput, should actual packet test evaluate system behaviour.
Single power modular integrates
12V single power, 160 × 100mm board outline facilitates 3U VPX chassis in layout network connect, maximum power consumption rated not high to 30W. Design when needed backplane power, product cooling and cables space together arrangement, 0–50℃operation range not can reuse other wide temperature board environment etc.grade.
The functional notes explain the product’s role from published configuration. Optional functions, software and peripherals follow the project definition. Chip capability is not the same as implemented I/O.
Architecture
EQIO
{{chapter}}
EQIO · VPX-2507 Product Manual
{{page}} / {{pages}}
03 ARCHITECTURE
Signal and functional relationships
Functional block diagram
Only express network port and forwarding functional relationship, not indicates switch chip internal structure; connect dual toward communications, jumbo frame and stream amount capability requires the end to end verification.
Platform and I/O
This board layer-2 network storage forwarding core, provides front panel 4-ch RJ45 and 1-ch backplane 1000BASE-T connect. Published data not gives switch chip or CPU model, block diagram only note port, power and forwarding functional relationship, 9K jumbo frame, switch code mode and stream quantity requires actual network in verification.
Reading the diagram Solid lines show published functional relationships, not on-board buses, bridge chips or connector pins. Optional controllers, radios, storage and software follow the configuration and interface files.
SPECIFICATIONS
EQIO
{{chapter}}
EQIO · VPX-2507 Product Manual
{{page}} / {{pages}}
04 SPECIFICATIONS
Technical specifications
Compiled from published product data. Batch, I/O and environmental ratings follow the order confirmation.
Technical data
| Power | +12V (single power power) |
|---|---|
| Transmission speed | 10/100/1000MbpS, supports 9K byte jumbo frame |
| Switch method | Storage forwarding, each network node etc.switch |
| Transmission mode | Full dual industrial /half dual industrial adaptive |
| Application level | Layer-2 |
| Power consumption | ≤ 30W |
| Operating system | Linux (Ubuntu/CentOS), Windows (driver supports) |
| Can reliability | Can reliability: MTBF30000h, maintenance: MTIR30min |
| Connector type | 1-ch 1000BASE-T I/O via T connector connect to backplane 4-ch 1000BASE-T I/O via standard RJ45 connector connect to baffle (can via switch code switch switch) |
Environmental conditions
| Operating temperature | 0~50℃ |
|---|---|
| Relative humidity | 95%non-condensing |
| Storage temperature | -20℃~65℃ |
Mechanical specifications and system requirements
| Specification | 160mm × 100mm (0pen VPX3U standard), weight ≤ 500g (typical value, not including heatsink) |
|---|
Applications
EQIO
{{chapter}}
EQIO · VPX-2507 Product Manual
{{page}} / {{pages}}
05 APPLICATIONS
From product capability to applications
Industrial equipment local-area interconnect
4-ch RJ45 can connect equipment, maintenance terminal or control unit, backplane link connect chassis internal controller, forms compact network attach solution. System required stated each equipment address and application stream amount, routing, network safety or remote management function should be matching equipment and software provides, not can be layer-2 switch capability automatic inferred.
Modular acquisition system networked
As multiple acquisition equipment via Ethernet transfer data when, can used switch card aggregation to VPX controller network path. Requires based on each equipment continuous stream amount evaluate on link load, and test end to end loss pack and buffer; 4 Gigabit port not represent single item backplane link has four times Gigabit bandwidth.
Mobile equipment internal communications
To installation space limited mobile equipment, can uses 3U board organize chassis internal and external network wiring, reduce spread switch equipment layout. Whether suited to specific vehicle-mounted operating condition still requires check temperature, vibration, power and connector requirements, product 0–50℃operation range should be treated as selection boundary.
Integration checks
| Backplane link | Confirm 1-ch 1000BASE-T via T connector to backplane pinout definition, match chassis controller and backplane network resources. |
|---|---|
| Port mode | 4-ch front panel RJ45 and switch code switch per delivery note settings; jumbo frame requires the end point and whole link together supports. |
| Stream amount budget | Per backplane on and port actual stream amount evaluate and capability, not each port rated rate add as host can used throughput. |
| Power and environment | 12V input, power consumption≤30W; check 160 × 100mm installation and 0–50℃operation conditions, separately confirm vehicle-mounted environment requirements. |
Configuration
EQIO
{{chapter}}
EQIO · VPX-2507 Product Manual
{{page}} / {{pages}}
06 CONFIGURATION
Appearance, configuration and selection
3U VPX Gigabit Ethernet Switch Card multi-angle reference
Multi-angle reference (generated from product photos); shipped units may differ.
Configuration
Uses 12V single power input, board dimensions 160 × 100mm, operating temperature 0–50℃.
Selection guide
| Order confirmation | Batch, I/O and environmental ratings follow the order confirmation |
|---|---|
| Published data | Compiled from published product data; EQIO provides selection and system integration |
| Configuration talk | Share the application, I/O count, environment and software so a configuration can be proposed |
Request a quotation and selection support
Email lyping@eqio.com Phone +86 182 8191 2988 Web eqio.com
Brand
EQIO · VPX-2507 Product Manual
{{page}} / {{pages}}
EQIO Easy Quick Input Output
BRAND
Measurement and control, made easy.
EQIO product family concept
EQIO product family · concept rendering
Brand story
EQIO builds measurement and control products and systems. The name stands for Easy Quick Input Output: Easy is a clear structure that is quick to learn, Quick is a direct path to efficient delivery, and Input / Output is every link between the device under test and the control system. The soft single-cycle wave inside the Q links the brand to signals, acquisition and I/O. “Measurement and control, made easy” is our promise for every selection, integration and delivery.
What we do
| Products | Data acquisition, test instruments, control and I/O, modular platforms, software, cables |
|---|---|
| Systems | Configured to the measurand, channels, accuracy and software, from design to commissioning |
| Support | Selection advice, training, maintenance and calibration |
How we deliver
| Requirements | |
|---|---|
| Solution design | |
| Build & integration | |
| Factory test | |
| Delivery & training | |
| Ongoing support |
Email lyping@eqio.com Phone +86 182 8191 2988 Web EQIO.COM