Cover
Farui cover brand
FRTS-5660
Cone Calorimeter
Cone Calorimeter
OXYGEN CONSUMPTION / MATERIAL RESEARCH
Resolve ignition, heat release and mass loss over time.
Study small-scale material behaviour under controlled radiant exposure. Cone calorimetry links ignition, heat release, smoke and mass change, helping development teams compare coatings, thicknesses and formulations under a defined thermal condition.
Principle
A conical heater exposes the specimen to a selected heat flux.
System
Radiant heater, specimen holder, load measurement, collection hood, exhaust measurement, gas analysis and acquisition software.
Application
Building materials, rail-interior materials and polymer research.
Original equipment photograph. Appearance only.
Original equipment photograph. Appearance only.
Sichuan Farui Testing Equipment Co., Ltd.
Product purpose and selection
VI / original brand mark
FRT…
Pro…
FARUI FIRETS
FIRETS.COM
{{page}} / {{pages}}
01 / PRODUCT / APPLICATION
Product purpose and selection
Study small-scale material behaviour under controlled radiant exposure. Cone calorimetry links ignition, heat release, smoke and mass change, helping development teams compare coatings, thicknesses and formulations under a defined thermal condition.
Original equipment photograph. Appearance only.
Original equipment photograph. Appearance only.
Measurement principle
VI / original brand mark
FRT…
Mea…
FARUI FIRETS
FIRETS.COM
{{page}} / {{pages}}
OXYGEN CONSUMPTION
Measurement principle
A conical heater exposes the specimen to a selected heat flux.
Measurement principle
A conical heater exposes the specimen to a selected heat flux. Combustion products enter an exhaust measurement section; oxygen concentration and exhaust flow support calorimetry, alongside weighing and optical smoke measurements.
Original equipment photograph. Appearance only.
Original equipment photograph. Appearance only.
Use in the laboratory
Radiant heater, specimen holder, load measurement, collection hood, exhaust measurement, gas analysis and acquisition software.
English edition follows the reviewed Chinese manuscript evidence. Configuration and laboratory conditions follow the technical file confirmed by both parties. Unconfirmed numerical claims from the Chinese edition are not restated here.
Specimens and construction
VI / original brand mark
FRT…
Spe…
FARUI FIRETS
FIRETS.COM
{{page}} / {{pages}}
SPECIMEN & EXPOSURE
Specimens and construction
Building materials, rail-interior materials and polymer research.
01
Specimens and construction
Building materials, rail-interior materials and polymer research. Optional gas analysis is selected for the study rather than assumed in the base equipment.
02
Use in the laboratory
Record heat flux, ignition mode, exposed area and edge wrapping. Check oxygen, flow and mass calibration, and use a common time reference for HRR, THR, ignition and mass change.
English edition follows the reviewed Chinese manuscript evidence. Configuration and laboratory conditions follow the technical file confirmed by both parties. Unconfirmed numerical claims from the Chinese edition are not restated here.
Calibration and verification
VI / original brand mark
FRT…
Cal…
FARUI FIRETS
FIRETS.COM
{{page}} / {{pages}}
CALIBRATION & QUALITY
Calibration and verification
Radiant heater, specimen holder, load measurement, collection hood, exhaust measurement, gas analysis and acquisition software.
01
Calibration and verification
Radiant heater, specimen holder, load measurement, collection hood, exhaust measurement, gas analysis and acquisition software.
02
Use in the laboratory
Record heat flux, ignition mode, exposed area and edge wrapping. Check oxygen, flow and mass calibration, and use a common time reference for HRR, THR, ignition and mass change.
English edition follows the reviewed Chinese manuscript evidence. Configuration and laboratory conditions follow the technical file confirmed by both parties. Unconfirmed numerical claims from the Chinese edition are not restated here.
Test sequence
VI / original brand mark
FRT…
Tes…
FARUI FIRETS
FIRETS.COM
{{page}} / {{pages}}
TEST WORKFLOW
Test sequence
A conical heater exposes the specimen to a selected heat flux.
Test sequence
A conical heater exposes the specimen to a selected heat flux. Combustion products enter an exhaust measurement section; oxygen concentration and exhaust flow support calorimetry, alongside weighing and optical smoke measurements.
Original equipment photograph. Appearance only.
Original equipment photograph. Appearance only.
Use in the laboratory
Record heat flux, ignition mode, exposed area and edge wrapping. Check oxygen, flow and mass calibration, and use a common time reference for HRR, THR, ignition and mass change.
English edition follows the reviewed Chinese manuscript evidence. Configuration and laboratory conditions follow the technical file confirmed by both parties. Unconfirmed numerical claims from the Chinese edition are not restated here.
Calculation and reported quantities
VI / original brand mark
FRT…
Cal…
FARUI FIRETS
FIRETS.COM
{{page}} / {{pages}}
MEASUREMENTS & CALCULATIONS
Calculation and reported quantities
ISO 5660-1 and ASTM E1354 address calorimetry under controlled radiant exposure.
01
Calculation and reported quantities
ISO 5660-1 and ASTM E1354 address calorimetry under controlled radiant exposure. Heat flux, orientation, backing and edge restraint affect results. Sector-specific requirements still determine specimen preparation and acceptance criteria.
02
Use in the laboratory
Record heat flux, ignition mode, exposed area and edge wrapping. Check oxygen, flow and mass calibration, and use a common time reference for HRR, THR, ignition and mass change.
English edition follows the reviewed Chinese manuscript evidence. Configuration and laboratory conditions follow the technical file confirmed by both parties. Unconfirmed numerical claims from the Chinese edition are not restated here.
Hardware arrangement
VI / original brand mark
FRT…
Har…
FARUI FIRETS
FIRETS.COM
{{page}} / {{pages}}
HARDWARE & CONFIGURATION
Hardware arrangement
Radiant heater, specimen holder, load measurement, collection hood, exhaust measurement, gas analysis and acquisition software.
01
Hardware arrangement
Radiant heater, specimen holder, load measurement, collection hood, exhaust measurement, gas analysis and acquisition software.
02
Use in the laboratory
Building materials, rail-interior materials and polymer research. Optional gas analysis is selected for the study rather than assumed in the base equipment.
English edition follows the reviewed Chinese manuscript evidence. Configuration and laboratory conditions follow the technical file confirmed by both parties. Unconfirmed numerical claims from the Chinese edition are not restated here.
Control software and records
VI / original brand mark
FRT…
Con…
FARUI FIRETS
FIRETS.COM
{{page}} / {{pages}}
DATA & SOFTWARE
Control software and records
Record heat flux, ignition mode, exposed area and edge wrapping.
What the screenshots show
These screenshots are original captures from the reviewed Chinese edition. They illustrate operating, recording or reporting functions available in that software. Displayed readings remain examples from the captured session.
How to read them
Record heat flux, ignition mode, exposed area and edge wrapping. Check oxygen, flow and mass calibration, and use a common time reference for HRR, THR, ignition and mass change.
English edition follows the reviewed Chinese manuscript evidence. Configuration and laboratory conditions follow the technical file confirmed by both parties. Unconfirmed numerical claims from the Chinese edition are not restated here.
Intended application
VI / original brand mark
FRT…
Int…
FARUI FIRETS
FIRETS.COM
{{page}} / {{pages}}
APPLICATION & INTERPRETATION
Intended application
Building materials, rail-interior materials and polymer research.
Intended application
Building materials, rail-interior materials and polymer research. Optional gas analysis is selected for the study rather than assumed in the base equipment.
Use in the laboratory
ISO 5660-1 and ASTM E1354 address calorimetry under controlled radiant exposure. Heat flux, orientation, backing and edge restraint affect results. Sector-specific requirements still determine specimen preparation and acceptance criteria.
English edition follows the reviewed Chinese manuscript evidence. Configuration and laboratory conditions follow the technical file confirmed by both parties. Unconfirmed numerical claims from the Chinese edition are not restated here.
High-tech enterprise
VI / original brand mark
FRT…
Hig…
FARUI FIRETS
FIRETS.COM
{{page}} / {{pages}}
10 / COMPANY
High-tech enterprise
Sichuan Farui Testing Equipment Co., Ltd. holds a High-tech Enterprise certificate. Its work covers fire-protection and material fire-test equipment, measurement and control software, and laboratory system integration.
Original High-tech Enterprise certificate. Dates and identifiers follow the certificate as issued.
Original High-tech Enterprise certificate. Dates and identifiers follow the certificate as issued.
Certificate number
GR202551000122
Issue date
2025.12.02
Stated validity
Three years
Issue date and validity are shown as stated on the certificate.
Quality management system
VI / original brand mark
FRT…
Qua…
FARUI FIRETS
FIRETS.COM
{{page}} / {{pages}}
11 / COMPANY
Quality management system
From technical requirements through on-site use, Farui organises instrument development, assembly and service within the certified management-system scope, connecting requirement confirmation, technical implementation and project delivery.
Original quality-management-system certificate. This is a company-system certificate, not product certification.
Original quality-management-system certificate. This is a company-system certificate, not product certification.
Certified standard
GB/T 19001-2016 / ISO 9001:2015
Certified scope
Research, assembly and service of industrial automatic-control system instruments
Registration number
30924Q0210R0S
Stated validity on the certificate
2024.06.06 — 2027.06.05
This page records the company management-system certificate. Coverage and current standing remain those registered by the certification body.
Industry participation
VI / original brand mark
FRT…
Ind…
FARUI FIRETS
FIRETS.COM
{{page}} / {{pages}}
12 / COMPANY
Industry participation
As a senior member of the Smart Laboratory Professional Committee of the China Association for Standardization, Farui follows test standards and smart-laboratory practice, connecting industry exchange with instrument design, measurement and technical service.
Original senior-membership certificate of the Smart Laboratory Professional Committee.
Original senior-membership certificate of the Smart Laboratory Professional Committee.
Membership and organisation
Senior member, Smart Laboratory Professional Committee, China Association for Standardization
Issue date
2026.07.21
Stated validity on the certificate
2027.07.20
Membership is shown as registered on the original certificate and its stated validity date.
Research and standards participation
VI / original brand mark
FRT…
Res…
FARUI FIRETS
FIRETS.COM
{{page}} / {{pages}}
13 / COMPANY
Research and standards participation
Around flame retardancy, fire protection and measurement systems, Farui continues to accumulate instrument-design, automatic-control and test-method experience, using research and standards participation in technical discussion and system design for complex tests.
8
Invention patents (count)
4
Utility models (count)
4
GB/T participation (count)
From method to apparatus
Test conditions, measured quantities and use cases are translated into configuration options, with the test method as the starting point for technical discussion.
From signal to record
Data acquisition, control software and combined systems are organised so that original signals, operating conditions and reported results remain corresponding.
Figures follow the April 2026 company introduction. Patent applications are not distinguished from granted patents. Participation lists follow the corresponding documents.
Contact Farui
FRT…
Contact Farui
FARUI FIRETS
FIRETS.COM
{{page}} / {{pages}}
CONTACT / FIRETS
Contact Farui
Discuss selection against the intended method, material and specimen form, measurement and reporting needs. Supply configuration and laboratory conditions follow the technical documents confirmed by both parties.
From the test need to the equipment configuration
Product selection / technical exchange Project configuration / service enquiry
Contact us on WeChat
Connect on WeChat
Sichuan Farui Testing Equipment Co., Ltd.
18281912988 / lyping@firets.com
58 Zhongjing Road, Youxian District, Mianyang, Sichuan, China
www.firets.com