Cover
EQIO
VPX-FTD2K-KB
PRODUCT MANUAL
3U Phytium FT-2000 Quad-Core VPX System Controller
Phytium FT-2000/4 4-core processor
Measurement and control, made easy.
Easy · Quick · Input · Output
EQIO.COM
Overview
EQIO
{{chapter}}
EQIO · VPX-FTD2K-KB Product Manual
{{page}} / {{pages}}
01 OVERVIEW
3U Phytium FT-2000 Quad-Core VPX System Controller
VPX system controller · Industrial gateway · Edge computing node · Embedded control · VPX · Phytium
VPX-FTD2K-KB uses Phytium FT2000/4 and X100 chip group, supports up to 16GB soldered DDR4 memory, integrates VGA, optoelectronic network, serial and mSATA I/O, can paired with Kylin OS and UOS system used. 2-ch BASE-T and 2-ch BASE-X rear I/O network facilitates organize chassis internal and external communications, function serial and debug port respectively settings. VGA and USB can connect operation peripherals, onboard mSATA location facilitates installation storage, suited to field measurement and control, communications and equipment management node.
3U Phytium FT-2000 Quad-Core VPX System Controller product photo
Product appearance reference; shipped units may differ.
Key features
Phytium FT2000/4 and X100 bridge chip 3U VPX、100×158.5mm Up to 16GB soldered DDR4
BASE-T and BASE-X network connect VGA, serial and mSATA I/O
Functions
EQIO
{{chapter}}
EQIO · VPX-FTD2K-KB Product Manual
{{page}} / {{pages}}
02 FUNCTIONS
Functions and engineering value
4-core compute and boot environment
FT2000/4 and X100 consists of 4-core compute and graphics platform, product board-level clock 2.0GHz, up to 16GB soldered DDR4. Processor vendor up to frequency not as this board operation frequency, UEFI firmware and Kylin, UOS system requires per actual delivery version matching confirm.
Optoelectronic network connect organize
Product lists 2-ch Gigabit BASE-T and 2-ch rear I/O BASE-X network, can used for arrangement different media and connect location communications solution. BASE-X signal external optoelectronic conversion, backplane routing and connector requires according to system solution confirm, not can directly resources quantity wording finished product optical port quantity.
Local HMI and serial maintenance
VGA provides up to 1080p display, 2-ch rear I/O USB2.0 and onboard mSATA I/O supports operation peripherals and storage. 2-ch RS-232 used for application connect, additional 1-ch CPU debug serial facilitates maintenance; firmware if selection Kylin or Kehua solution, must first completes corresponding adapts verification.
The functional notes explain the product’s role from published configuration. Optional functions, software and peripherals follow the project definition. Chip capability is not the same as implemented I/O.
Architecture
EQIO
{{chapter}}
EQIO · VPX-FTD2K-KB Product Manual
{{page}} / {{pages}}
03 ARCHITECTURE
Platform and functional relationships
Functional block diagram
Based on board-level specification express functional relationship; BASE-X not directly etc.same finished product optical port, firmware option and processor vendor frequency upper limit respectively processing.
Platform and I/O
FT2000/4 uses 4-core FTC663 and ARMv8 architecture, this controller stated used 2.0GHz board-level configured with, X100 provides graphics and expansion resources. Up to 16GB soldered DDR4, mSATA and optoelectronic network resources forms 3U VPX controller basic, actual I/O media and firmware option must per delivery solution confirm.
Reading the diagram Solid lines show published functional relationships, not on-board buses, bridge chips or connector pins. Optional controllers, radios, storage and software follow the configuration and interface files.
SPECIFICATIONS
EQIO
{{chapter}}
EQIO · VPX-FTD2K-KB Product Manual
{{page}} / {{pages}}
04 SPECIFICATIONS
Technical specifications
Compiled from published product data. Batch, I/O and environmental ratings follow the order confirmation.
Core system
| CPU | Phytium FT2000/4 processor, clock 2.0GHz, chip group Phytium X100 |
|---|---|
| System memory | Soldered DDR4 memory, maximum 16GB |
| BIOS | UEFI firmware, optional Kylin, Kehua firmware (required adapts) |
| Display | Integrates GPU X100 |
| Operating system | Kylin OS, UOS etc. |
I/O and expansion
| USB | 2-chUSB2.0 rear I/O |
|---|---|
| Storage | 1-chMSATA I/O, onboard |
| Serial | 1-chCPU debug serial, maximum baud rate 115200 BPS; 2-ch RS-232 function serial, maximum baud rate 115200 BPS |
| Display interfaces | 1-chVGA, maximum resolution 1920*1080@60Hz |
| Network interfaces | 2-ch Gigabit BASE-T, 2-chBASE-X rear I/O |
Environmental conditions
| Operating temperature | -40℃– 65℃ (operating temperature), -40℃ ~ 85℃ (storage temperature) |
|---|---|
| Relative humidity | 5% to 95%humidity non-condensing |
Mechanical specifications and system requirements
| Specification | 100mm*158.5mm |
|---|
COMPONENTS
EQIO
{{chapter}}
EQIO · VPX-FTD2K-KB Product Manual
{{page}} / {{pages}}
05 COMPONENTS
Processor and device specifications
Device figures come from vendor publications and describe the chip or module. The implemented product follows the specification tables. Optional devices are supplied with the selected configuration.
Phytium FT-2000/4
| Processor core count | 4-core |
|---|---|
| Processor micro architecture | FTC663 |
| ISA and actuation mode | ARMv8; supports ARM64 and ARM32 |
| Up to clock | 2.6 GHz |
| Layer-2 cache | 4 MB |
| L3 cache | 4 MB |
| CPU memory controller | 2 DDR4 I/O |
| CPU PCIe resources | 34 lanes PCIe3.0 |
| CPU network controller | 2 Gigabit Ethernet I/O |
| Other on-chip I/O | SD2.0, 4 × UART, 32 × GPIO, 4 × I2C, QSPI, 2 × SPI, 3 × CAN, 2 × WDT, 16 × external interrupt |
| Hardware virtualization | Supports |
Phytium FT-2000/4 (continued)
| Floating-point and SIMD | Single/dual accuracy floating-point and ASIMD |
|---|---|
| Chip safety architecture | PSPA1.0 |
Phytium X100 chipset
| Device role | Micro processor matching graphics and I/O expansion chip |
|---|---|
| GPU compute rated | 300 GFLOPS |
| Video de code | 4K@30fps; H.264/H.265, MPEG4, MPEG2 etc. |
| GPU memory supports upper limit | Up to 8GB |
| Display control I/O | 3 × DisplayPort1.4: including 2-ch up to 3840 × 2160@60Hz, additional 1-ch up to 1280 × 1024@60Hz |
| PCIe on | 1×PCIe3.0 x16 |
| PCIe downlink | Vendor list 8-ch downlink connect: 2-chx2 and 6-chx1; including 2-chx1 and SATA3.0 multiplexed |
COMPONENTS
EQIO
{{chapter}}
EQIO · VPX-FTD2K-KB Product Manual
{{page}} / {{pages}}
05 COMPONENTS
Processor and device specifications (continued)
Phytium X100 chipset (continued)
| Expansion I/O category | PCIe3.0, SATA3.0, USB3.1, SD/eMMC, NAND Flash, I2S audio |
|---|---|
| Other on-chip I/O | 2×SD/SDIO/eMMC、NAND、4×UART、96×GPIO、8×MIO、4×PWM、QSPI、2×SPI master、3×SMBus、2×CAN |
| Chip safety architecture | PSPA1.0 |
Sources: Phytium IT Co., Ltd., FT-2000/4 high-performance desktop CPU; Phytium IT Co., Ltd., Phytium chipset X100.
Applications
EQIO
{{chapter}}
EQIO · VPX-FTD2K-KB Product Manual
{{page}} / {{pages}}
06 APPLICATIONS
From product capability to applications
Industrial device communications gateway
Uses BASE-T and BASE-X network resources can planning device network and chassis internal communications, 4-core platform processing application protocol and data compiled. Selection specific media should first check BASE-X electrical definition and matching module, application throughput and network isolation policy should complete software solution in verification.
Compact edge management node
3U board outline, soldered memory and onboard mSATA location suited to modular chassis internal edge management node. VGA and rear I/O USB can used for installation maintenance, application data via network HMI; storage capacity, log write and boot recovery method required according to actual run task configured with.
Serial equipment monitoring terminal
2-ch RS-232 can connect uses should signal level standard field controller, together with Gigabit Ethernet aggregation equipment status and toward on position application provides data. CPU debug the port should and application link respectively management, system debug when needed log serial purpose, baud rate and protocol settings, avoid wiring confuse.
Integration checks
| Clock and memory | This board FT2000/4 per 2.0GHz configured with, up to 16GB DDR4; not reuse processor vendor up to frequency as board-level rated. |
|---|---|
| Network media | 2-ch BASE-T and 2-ch rear I/O BASE-X respectively check; optical module, conversion and backplane connect not default all fully fitted. |
| Firmware adapts | Default UEFI; Kylin, Kehua required adapts optional solution, confirm firmware, system and driver combination. |
| Mechanical and environment | Check 100 × 158.5mm board outline, mSATA installation and backplane pinout, and verification−40–65℃run cooling. |
Configuration
EQIO
{{chapter}}
EQIO · VPX-FTD2K-KB Product Manual
{{page}} / {{pages}}
07 CONFIGURATION
Appearance, configuration and selection
3U Phytium FT-2000 Quad-Core VPX System Controller multi-angle reference
Multi-angle reference (generated from product photos); shipped units may differ.
Configuration
Uses UEFI firmware, provides Kylin OS and UOS system solution, function serial RS-232.
Selection guide
| Order confirmation | Batch, I/O and environmental ratings follow the order confirmation |
|---|---|
| Published data | Compiled from published product data; EQIO provides selection and system integration |
| Configuration talk | Share the application, I/O count, environment and software so a configuration can be proposed |
Request a quotation and selection support
Email lyping@eqio.com Phone +86 182 8191 2988 Web eqio.com
Brand
EQIO · VPX-FTD2K-KB Product Manual
{{page}} / {{pages}}
EQIO Easy Quick Input Output
BRAND
Measurement and control, made easy.
EQIO product family concept
EQIO product family · concept rendering
Brand story
EQIO builds measurement and control products and systems. The name stands for Easy Quick Input Output: Easy is a clear structure that is quick to learn, Quick is a direct path to efficient delivery, and Input / Output is every link between the device under test and the control system. The soft single-cycle wave inside the Q links the brand to signals, acquisition and I/O. “Measurement and control, made easy” is our promise for every selection, integration and delivery.
What we do
| Products | Data acquisition, test instruments, control and I/O, modular platforms, software, cables |
|---|---|
| Systems | Configured to the measurand, channels, accuracy and software, from design to commissioning |
| Support | Selection advice, training, maintenance and calibration |
How we deliver
| Requirements | |
|---|---|
| Solution design | |
| Build & integration | |
| Factory test | |
| Delivery & training | |
| Ongoing support |
Email lyping@eqio.com Phone +86 182 8191 2988 Web EQIO.COM
官方參考資料
EQIO VPX-FTD2K-KB product page
Phytium IT Co., Ltd. · FT-2000/4 high-performance desktop CPU