Cover
EQIO
COMe-D3000
PRODUCT MANUAL
Phytium D3000 COM Express Type 6 Module
Phytium D3000 8-core processor
Appearance reference (generated from product photos); shipped units may differ.
Measurement and control, made easy.
Easy · Quick · Input · Output
EQIO.COM
Overview
EQIO
{{chapter}}
EQIO · COMe-D3000 Product Manual
{{page}} / {{pages}}
01 OVERVIEW
Phytium D3000 COM Express Type 6 Module
COM Express compute module · High-performance embedded terminal · Edge service unit · Industrial control · COM Express · Phytium
COMe-D3000 uses Phytium Tengrui D3000 8-core processor, provides high-speed PCIe, network and display expansion, supports Kylin OS, UnionTech and Ubuntu system, used for embedded terminal, industrial control and edge service unit integrates. Gigabit Ethernet and 10GbE serial I/O facilitates organize device communications, USB, serial, GPIO and industrial bus can combined with carrier brought out. Module uses 125 × 95mm dimensions, display, storage and expansion card reserved connect path, facilitates integrate embedded controller system.
Phytium D3000 COM Express Type 6 Module product photo
Product appearance reference; shipped units may differ.
Key features
Phytium D3000 8-core compute platform Type6 module, 125 × 95mm DP and HDMI/VGA dual display solution
Gigabit Ethernet and USXGMII I/O PCIe, SATA and industrial bus connect
Functions
EQIO
{{chapter}}
EQIO · COMe-D3000 Product Manual
{{page}} / {{pages}}
02 FUNCTIONS
Functions and engineering value
8-core compute platform integrates
Module uses D3000 8-core processor, up to clock 2.5G Hz, together with X100 graphics resources forms Type6 embedded compute platform. 125 × 95mm module processing platform and application carrier isolation, suited to around current has operating system and peripherals requirement establish can multiplexed equipment controller solution.
For high-speed expansion carrier connect
Product lists multi generation PCIe connect capability and SATA3.0 storage interfaces, can according to expansion card and system disk requirement arrangement carrier resources. Data still not item by item gives channel quantity and combination limit, design stage should first confirm complete pins definition and link configured with, again determine slot and equipment connect quantity.
Dual display and hybrid network connect
DP and HDMI/VGA solution supports independent dual display, can used for operation video and status show. 1-ch Gigabit BASE-T and 1-ch USXGMII10G I/O provides different network connect form; USXGMII belongs to carrier side I/O, not can directly treat as already fully fitted 10GbE RJ45 or optical port.
The functional notes explain the product’s role from published configuration. Optional functions, software and peripherals follow the project definition. Chip capability is not the same as implemented I/O.
Architecture
EQIO
{{chapter}}
EQIO · COMe-D3000 Product Manual
{{page}} / {{pages}}
03 ARCHITECTURE
Compute platform and functional relationships
Functional block diagram
Only illustration published functional relationship; USXGMII not etc. To finished product 10GbE port, PCIe assign, memory and display select relationship must per delivery configured with confirm.
Platform and I/O
D3000 8-coreFTC862, ARMv8 processing platform, product X100 handles graphics expansion and provides Type6 carrier connect. Published specification emphasize dual display, Gigabit and USXGMII network and high-speed expansion, but memory configured with and each generation PCIe channel assign still requires per specific delivery version complete.
Reading the diagram Solid lines show published functional relationships, not on-board buses, bridge chips or connector pins. Optional controllers, radios, storage and software follow the configuration and interface files.
SPECIFICATIONS
EQIO
{{chapter}}
EQIO · COMe-D3000 Product Manual
{{page}} / {{pages}}
04 SPECIFICATIONS
Technical specifications
Compiled from published product data. Batch, I/O and environmental ratings follow the order confirmation.
Core system
| CPU | Phytium D3000 8-core processor, up to 2.5G Hz |
|---|---|
| Display | Phytium X100 bridge chip integrates graphics controller |
| BIOS | Phytium UEFI BIOS |
| Operating system | Kylin OS, UnionTech, Ubuntu etc.operating system |
I/O and expansion
| Other I/O | Multiple USB3.0/2.0 I/O SPI, I2C, CAN-FD etc.bus I/O serial (UART), GPIO I/O |
|---|---|
| Display interfaces | 1-chDP, 1-chHDMI/VGA (independent dual display output), supports HD display output |
| Network interfaces | 1 10/100/1000 Base-T Ethernet port, 1 USXGMII10G Ethernet I/O |
| Storage interfaces | Supports SATA3.0 I/O |
| Expansion slots | PCIe5.0/4.0/3.0, supports multi type high-speed expansion |
Environmental conditions
| Operating temperature | -40℃ ~ 65℃ (operating temperature), -50℃ ~ 85℃ (storage temperature) |
|---|---|
| Humidity | 5%~95%humidity non-condensing |
Mechanical specifications and system requirements
| Specification | Type6 base this type, 125mm x 95mm |
|---|
COMPONENTS
EQIO
{{chapter}}
EQIO · COMe-D3000 Product Manual
{{page}} / {{pages}}
05 COMPONENTS
Processor and device specifications
Device figures come from vendor publications and describe the chip or module. The implemented product follows the specification tables. Optional devices are supplied with the selected configuration.
Phytium D3000
| Processor core count | 8-core |
|---|---|
| Processor micro architecture | FTC862 |
| ISA and actuation mode | ARMv8; supports ARM64 and ARM32 actuation mode |
| Up to clock | 2.5 GHz |
| CPU memory controller | 2 DDR5 I/O, compatible DDR4 |
| CPU PCIe resources | 28 lanes PCIe 5.0/4.0/3.0 |
| CPU network controller | 2 Ethernet I/O, supports SGMII and USXGMII |
| CPU storage controller | 3×SATA3.0 |
| Other on-chip I/O | 4×UART、64×GPIO、4×PWM、2×SPI master、3×I2C/PMBUS、2×I3C、2×CAN-FD、1×LocalBus |
| Hardware virtualization | Supports |
Phytium D3000 (continued)
| Floating-point and SIMD | Single/dual accuracy floating-point and ASIMD |
|---|---|
| Chip safety architecture | PSPA 2.0 |
Phytium X100 chipset
| Device role | Micro processor matching graphics and I/O expansion chip |
|---|---|
| GPU compute rated | 300 GFLOPS |
| Video de code | 4K@30fps; H.264/H.265, MPEG4, MPEG2 etc. |
| GPU memory supports upper limit | Up to 8GB |
| Display control I/O | 3 × DisplayPort1.4: including 2-ch up to 3840 × 2160@60Hz, additional 1-ch up to 1280 × 1024@60Hz |
| PCIe on | 1×PCIe3.0 x16 |
| PCIe downlink | Vendor list 8-ch downlink connect: 2-chx2 and 6-chx1; including 2-chx1 and SATA3.0 multiplexed |
COMPONENTS
EQIO
{{chapter}}
EQIO · COMe-D3000 Product Manual
{{page}} / {{pages}}
05 COMPONENTS
Processor and device specifications (continued)
Phytium X100 chipset (continued)
| Expansion I/O category | PCIe3.0, SATA3.0, USB3.1, SD/eMMC, NAND Flash, I2S audio |
|---|---|
| Other on-chip I/O | 2×SD/SDIO/eMMC、NAND、4×UART、96×GPIO、8×MIO、4×PWM、QSPI、2×SPI master、3×SMBus、2×CAN |
| Chip safety architecture | PSPA1.0 |
Sources: Phytium IT Co., Ltd., Phytium Tengrui D3000 high-performance desktop CPU; Phytium IT Co., Ltd., Phytium chipset X100.
Applications
EQIO
{{chapter}}
EQIO · COMe-D3000 Product Manual
{{page}} / {{pages}}
06 APPLICATIONS
From product capability to applications
High-performance embedded operation end
Equipment requires parallel run operator UI, data compiled and communications task when, can base to D3000 8-core platform planning software role split. Dual display resources suited to respectively present operation and status video, actual graphics mode, memory configured with and application load should and selected Kylin, UnionTech or Ubuntu image together verification.
Edge data aggregation node
Via Gigabit BASE-T connect current has device network, and carrier completes USXGMII I/O matching rear evaluate high-speed network attach, can forms edge data aggregation solution. Storage and expansion card quantity should based on confirm rear PCIe and SATA assign, avoid first per chip resources quantity arrangement peripheral device.
Industrial control carrier platform
UART, GPIO, SPI, I2C and CAN-FD resources dedicated carrier provides multi type device connection method, can used for controller and external control unit between data HMI. Field side signal level conversion, isolated and connector requires from carrier implements, control performance and protocol compatible should via actual equipment verification.
Integration checks
| Memory configured with | Current has product the table does not stated memory type and capacity; quotation and technical protocol in must add complete actual configured with rear again determine software resources budget. |
|---|---|
| High-speed I/O | Stated PCIe generation, channel number, split and multiplexed limit; USXGMII10G external PHY and connector from carrier solution confirm. |
| Display solution | Confirm DP and HDMI/VGA select relationship, resolution and dual display combination, not two kinds of I/O solution and list confirm as all standard. |
| System and temperature | Check system image, driver and firmware version, and product in verification−40–65℃operating temperature and cooling design. |
Configuration
EQIO
{{chapter}}
EQIO · COMe-D3000 Product Manual
{{page}} / {{pages}}
07 CONFIGURATION
Appearance, configuration and selection
Phytium D3000 COM Express Type 6 Module multi-angle reference
Multi-angle reference (generated from product photos); shipped units may differ.
Configuration
Via carrier connect display and peripherals, provides Kylin OS, UnionTech and Ubuntu system supports.
Selection guide
| Order confirmation | Batch, I/O and environmental ratings follow the order confirmation |
|---|---|
| Published data | Compiled from published product data; EQIO provides selection and system integration |
| Configuration talk | Share the application, I/O count, environment and software so a configuration can be proposed |
Request a quotation and selection support
Email lyping@eqio.com Phone +86 182 8191 2988 Web eqio.com
Brand
EQIO · COMe-D3000 Product Manual
{{page}} / {{pages}}
EQIO Easy Quick Input Output
BRAND
Measurement and control, made easy.
EQIO product family concept
EQIO product family · concept rendering
Brand story
EQIO builds measurement and control products and systems. The name stands for Easy Quick Input Output: Easy is a clear structure that is quick to learn, Quick is a direct path to efficient delivery, and Input / Output is every link between the device under test and the control system. The soft single-cycle wave inside the Q links the brand to signals, acquisition and I/O. “Measurement and control, made easy” is our promise for every selection, integration and delivery.
What we do
| Products | Data acquisition, test instruments, control and I/O, modular platforms, software, cables |
|---|---|
| Systems | Configured to the measurand, channels, accuracy and software, from design to commissioning |
| Support | Selection advice, training, maintenance and calibration |
How we deliver
| Requirements | |
|---|---|
| Solution design | |
| Build & integration | |
| Factory test | |
| Delivery & training | |
| Ongoing support |
Email lyping@eqio.com Phone +86 182 8191 2988 Web EQIO.COM
Fonti ufficiali
Phytium IT Co., Ltd. · Phytium Tengrui D3000 high-performance desktop CPU