Cover
EQIO
VPX-GD6208
PRODUCT MANUAL
6U Phytium D2000 Eight-Core VPX System Controller
Phytium D2000 8-core processor
Measurement and control, made easy.
Easy · Quick · Input · Output
EQIO.COM
Overview
EQIO
{{chapter}}
EQIO · VPX-GD6208 Product Manual
{{page}} / {{pages}}
01 OVERVIEW
6U Phytium D2000 Eight-Core VPX System Controller
VPX system controller · Rugged compute platform · Display-control integrates · Data processing · VPX · Phytium
VPX-GD6208 uses Phytium D2000-8 and X100 chip group, supports up to 16GB soldered DDR4 memory, provides front rear I/O network, display, USB and PCIe expansion, supports multi position operating temperature configured with. Front panel and backplane network separate layout, DVI and VGA used for local and rear part display connection, serial can attach industrial equipment. Board on provides storage and high-speed expansion path, suited to 6U modular chassis in combination acquisition, communications and control function.
6U Phytium D2000 Eight-Core VPX System Controller product photo
Product appearance reference; shipped units may differ.
Key features
6U VPX standard board outline Phytium D2000 8-core and X100 Up to 16GB soldered DDR4
Front I/O dual Gigabit and rear I/O network signal DVI, VGA and industrial serial
Functions
EQIO
{{chapter}}
EQIO · VPX-GD6208 Product Manual
{{page}} / {{pages}}
02 FUNCTIONS
Functions and engineering value
6U 8-core compute node
D2000 8-core processor and X100 bridge chip, up to 16GB soldered DDR4 forms 6U VPX compute node. Platform can run published lists Kylin, UOS or Ubuntu solution, system software and driver should match actual board and backplane definition, environment etc.grade then per selected commercial, industrial or wide temperature version confirm.
Front rear network and display assign
Front panel dual Gigabit I/O handles local device connection, 4-ch rear I/O Gigabit signal facilitates organize chassis internal communications. DVI-D and rear I/O VGA used for display, HDMI only lists reserved, not can treat as already can used port; front rear connect should actual connector and rear I/O definition based on.
Storage and expansion space selection
Onboard 2.5-inchSATA storage location and XMC storage either-or relationship, must follow data log or function expansion requirement trade-off. PCIe link per hardware strap solution organize, published in the table each mode not should accumulate plus compute; carrier and backplane design should configured with freeze rear again arrangement device connection.
The functional notes explain the product’s role from published configuration. Optional functions, software and peripherals follow the project definition. Chip capability is not the same as implemented I/O.
Architecture
EQIO
{{chapter}}
EQIO · VPX-GD6208 Product Manual
{{page}} / {{pages}}
03 ARCHITECTURE
Platform and functional relationships
Functional block diagram
Note published functional relationship, not indicates fixed backplane topology; XMC/SATA mutually exclusive, reserved HDMI and PCIe configured with required delivery version in confirm.
Platform and I/O
D2000 8-core ARM platform and X100 consists of 6U VPX system controller, up to 16GB soldered DDR4 supports system and application run. Product key point front rear network connect, display and high-speed expansion, XMC and onboard storage storage configured with trade-off, reserved HDMI and PCIe each mode must per actual version confirm.
Reading the diagram Solid lines show published functional relationships, not on-board buses, bridge chips or connector pins. Optional controllers, radios, storage and software follow the configuration and interface files.
SPECIFICATIONS
EQIO
{{chapter}}
EQIO · VPX-GD6208 Product Manual
{{page}} / {{pages}}
04 SPECIFICATIONS
Technical specifications
Compiled from published product data. Batch, I/O and environmental ratings follow the order confirmation.
Core system
| CPU | Phytium Tengrui D2000-8 processor, Phytium X100 chip group |
|---|---|
| System memory | Soldered DDR4 memory, maximum 16GB |
| BIOS | UEFI firmware |
| Operating system | Kylin OS, UOS, Ubuntu |
I/O and expansion
| USB | Front panel 3 USB3.0/2.0 I/O |
|---|---|
| GPIO | 3 GPIO HDD Led input signal |
| Storage | Onboard 1 SATA2.5 I/O (and XMC either-or) |
| Serial | RS232/422/485 |
| Display interfaces | DVI-D*1, 1 group VGA to backplane (resolution 1920*1200), reserved HDMI*1 (resolution 1920*1080) |
| Network interfaces | Front plate 2 Gigabit Ethernet port, rear I/O 4 Gigabit Ethernet signal |
| Expansion slots | 2-chPCIe3.0 × 16, supports hardware strap 2-chPCIe × 8 or 4-chPCIe × 4 |
Environmental conditions
| Operating temperature | 0℃ ~ 70℃ (commercial grade) -20℃ ~ 70℃ (industrial grade) -40℃ ~ 70℃ (wide temperature grade) |
|---|---|
| Storage temperature | -40℃ ~ 85℃ |
Mechanical specifications and system requirements
| Specification | 6U VPX standard architecture, 233.35mm × 160mm |
|---|
COMPONENTS
EQIO
{{chapter}}
EQIO · VPX-GD6208 Product Manual
{{page}} / {{pages}}
05 COMPONENTS
Processor and device specifications
Device figures come from vendor publications and describe the chip or module. The implemented product follows the specification tables. Optional devices are supplied with the selected configuration.
Phytium D2000
| Processor core count | 8-core |
|---|---|
| Processor micro architecture | FTC663 |
| ISA and actuation mode | ARMv8; supports ARM64 and ARM32 actuation mode |
| Up to clock | 2.3 GHz |
| Layer-2 cache | 8 MB |
| L3 cache | 4 MB |
| CPU memory controller | 2 DDR4 I/O |
| CPU PCIe resources | 34 lanes PCIe 3.0 |
| CPU network controller | 2 Gigabit Ethernet I/O |
| Other on-chip I/O | 1 × SD2.0, 4 × UART, 32 × GPIO, 4 × I2C, 1 × QSPI, 2 × general-purpose SPI, 3 × CAN, 2 × WDT, 16 × external interrupt |
Phytium D2000 (continued)
| Hardware virtualization | Supports |
|---|---|
| Floating-point and SIMD | Single/dual accuracy floating-point and ASIMD |
| Chip safety architecture | PSPA 1.0 |
Phytium X100 chipset
| Device role | Micro processor matching graphics and I/O expansion chip |
|---|---|
| GPU compute rated | 300 GFLOPS |
| Video de code | 4K@30fps; H.264/H.265, MPEG4, MPEG2 etc. |
| GPU memory supports upper limit | Up to 8GB |
| Display control I/O | 3 × DisplayPort1.4: including 2-ch up to 3840 × 2160@60Hz, additional 1-ch up to 1280 × 1024@60Hz |
| PCIe on | 1×PCIe3.0 x16 |
COMPONENTS
EQIO
{{chapter}}
EQIO · VPX-GD6208 Product Manual
{{page}} / {{pages}}
05 COMPONENTS
Processor and device specifications (continued)
Phytium X100 chipset (continued)
| PCIe downlink | Vendor list 8-ch downlink connect: 2-chx2 and 6-chx1; including 2-chx1 and SATA3.0 multiplexed |
|---|---|
| Expansion I/O category | PCIe3.0, SATA3.0, USB3.1, SD/eMMC, NAND Flash, I2S audio |
| Other on-chip I/O | 2×SD/SDIO/eMMC、NAND、4×UART、96×GPIO、8×MIO、4×PWM、QSPI、2×SPI master、3×SMBus、2×CAN |
| Chip safety architecture | PSPA1.0 |
Sources: Phytium IT Co., Ltd., Phytium Tengrui D2000 high-performance desktop CPU; Phytium IT Co., Ltd., Phytium chipset X100.
Applications
EQIO
{{chapter}}
EQIO · VPX-GD6208 Product Manual
{{page}} / {{pages}}
06 APPLICATIONS
From product capability to applications
Multi module data processing platform
Match 6U VPX chassis in together with acquisition and communications module, can 8-core compute used for task processing and system management. Selection PCIe mode first requires check backplane channel and peripherals topology, actual data processing performance should be acquisition stream amount, software load and storage solution together verification.
Multi network devices aggregation
Front rear total multi-channel Gigabit resources suited to used for multiple equipment domain data aggregation and status management, can per system solution distinguish chassis internal and external connect. I/O distribution provides routing basic, but routing, isolated and redundant etc.function still by software implements, and required verification corresponding configured with under throughput and fault processing.
Display-control and chassis maintenance node
DVI-D and rear I/O VGA can configured with operation or maintenance display, front panel USB facilitates attach local peripherals. If at the same time requires XMC expansion and onboard storage, should first processing either-or limit and separately arrangement storage location; reserved HDMI required confirm actual assembly and firmware supports rear used.
Integration checks
| Temperature configured with | Commercial 0–70℃, industrial−20–70℃, wide temperature−40–70℃ different version, selection when needed fixed etc.grade. |
|---|---|
| Storage and XMC | Onboard 2.5-inchSATA location and XMC either-or; confirm space, cooling and required expansion function. |
| Link configured with | PCIe per hardware strap mode used; published list link quantity and split relationship must use delivery schematic or pins table core actual. |
| Display and backplane | HDMI reserved, not cannot count into standard output; check front dual Gigabit, rear 4-ch Gigabit signal and backplane connect definition. |
Configuration
EQIO
{{chapter}}
EQIO · VPX-GD6208 Product Manual
{{page}} / {{pages}}
07 CONFIGURATION
Appearance, configuration and selection
6U Phytium D2000 Eight-Core VPX System Controller multi-angle reference
Multi-angle reference (generated from product photos); shipped units may differ.
Configuration
Provides commercial temperature, industrial and wide temperature version, onboard storage and XMC uses selection configured with.
| Temperature version | 0~70℃ / -20~70℃ / -40~70℃; different etc.grade configured with |
|---|
Selection guide
| Order confirmation | Batch, I/O and environmental ratings follow the order confirmation |
|---|---|
| Published data | Compiled from published product data; EQIO provides selection and system integration |
| Configuration talk | Share the application, I/O count, environment and software so a configuration can be proposed |
Request a quotation and selection support
Email lyping@eqio.com Phone +86 182 8191 2988 Web eqio.com
Brand
EQIO · VPX-GD6208 Product Manual
{{page}} / {{pages}}
EQIO Easy Quick Input Output
BRAND
Measurement and control, made easy.
EQIO product family concept
EQIO product family · concept rendering
Brand story
EQIO builds measurement and control products and systems. The name stands for Easy Quick Input Output: Easy is a clear structure that is quick to learn, Quick is a direct path to efficient delivery, and Input / Output is every link between the device under test and the control system. The soft single-cycle wave inside the Q links the brand to signals, acquisition and I/O. “Measurement and control, made easy” is our promise for every selection, integration and delivery.
What we do
| Products | Data acquisition, test instruments, control and I/O, modular platforms, software, cables |
|---|---|
| Systems | Configured to the measurand, channels, accuracy and software, from design to commissioning |
| Support | Selection advice, training, maintenance and calibration |
How we deliver
| Requirements | |
|---|---|
| Solution design | |
| Build & integration | |
| Factory test | |
| Delivery & training | |
| Ongoing support |
Email lyping@eqio.com Phone +86 182 8191 2988 Web EQIO.COM
Sources officielles
Phytium IT Co., Ltd. · Phytium Tengrui D2000 high-performance desktop CPU