Cover
EQIO
COMe-D2000
PRODUCT MANUAL
Phytium D2000 COM Express Type 6 Module
Phytium D2000 8-core processor
Appearance reference (generated from product photos); shipped units may differ.
Measurement and control, made easy.
Easy · Quick · Input · Output
EQIO.COM
Overview
EQIO
{{chapter}}
EQIO · COMe-D2000 Product Manual
{{page}} / {{pages}}
01 OVERVIEW
Phytium D2000 COM Express Type 6 Module
COM Express compute module · Industrial control · Rail transit · Embedded terminal · COM Express · Phytium
COMe-D2000 uses Phytium Tengrui D2000/8 and X100 bridge chip, onboard DDR4 memory, provides PCIe, display, storage and industrial peripheral I/O, supports Kylin OS and UOS etc.operating system, used for COM Express carrier on core compute integrates. Gigabit Ethernet, USB, TTL serial, GPIO and CAN via carrier connect external equipment, VGA and dual DP used for display output. Module compute and I/O resources centralized layout, suited to equipment controller, HMI and industrial data acquisition system.
Phytium D2000 COM Express Type 6 Module product photo
Product appearance reference; shipped units may differ.
Key features
Phytium D2000 8-core and X100 bridge chip Up to 16GB soldered DDR4 VGA and dual DP display connection
3-ch SATA3.0 storage interfaces USB, GPIO, serial and CAN
Functions
EQIO
{{chapter}}
EQIO · COMe-D2000 Product Manual
{{page}} / {{pages}}
02 FUNCTIONS
Functions and engineering value
8-core compute and I/O expansion
D2000 8-core processor together with X100 bridge chip, COM Express module on provides compute, graphics and peripheral connection resources. Industrial grade 2.0GHz and commercial grade 2.3GHz different solution, selection when clock, memory capacity and environment etc.grade and fixed, avoid two kinds of configured with combined and the same standard.
Carrier side high-speed resources configured with
Module lists PCIe x16 and multi-channel x1 connect, allow per specified mode split narrower link, can for acquisition or communications expansion card planning carrier. 3-ch SATA3.0 and optional BGA SSD provides different storage path, actual channel combination and boot method should combined with carrier design and firmware confirm.
Display and industrial peripherals organize
VGA and dual DP can used for operation and status display, Gigabit Ethernet, USB and GPIO handles device connection. 2-ch CAN and 2-ch TTL storage jumper select relationship, therefore bus solution should circuit design front determine; TTL signal via required transceiver circuit rear only then connect uses other signal level standard field equipment.
The functional notes explain the product’s role from published configuration. Optional functions, software and peripherals follow the project definition. Chip capability is not the same as implemented I/O.
Architecture
EQIO
{{chapter}}
EQIO · COMe-D2000 Product Manual
{{page}} / {{pages}}
03 ARCHITECTURE
Compute platform and functional relationships
Functional block diagram
Illustration published function resources relationship, not indicates D2000 and X100 actual on-board connect; CAN/TTL and PCIe split all require per option solution confirm.
Platform and I/O
D2000 provides 8 FTC663 processor core and ARMv8 actuation capability, X100 handles graphics and I/O expansion role. Product up to 16GB soldered DDR4, display, storage and industrial peripherals resources organize to Type6 module, board-level channel quantity and display specification product definition shall prevail, not per processor native resources directly external infer.
Reading the diagram Solid lines show published functional relationships, not on-board buses, bridge chips or connector pins. Optional controllers, radios, storage and software follow the configuration and interface files.
SPECIFICATIONS
EQIO
{{chapter}}
EQIO · COMe-D2000 Product Manual
{{page}} / {{pages}}
04 SPECIFICATIONS
Technical specifications
Compiled from published product data. Batch, I/O and environmental ratings follow the order confirmation.
Core system
| CPU | Tengrui D2000/8, 8-core, industrial grade clock 2.0GHz; commercial grade clock 2.3GHz, Phytium X100 bridge chip |
|---|---|
| System memory | Soldered DDR4 memory, maximum 16GB |
| Display | Integrates GPU X100 |
| BIOS | UEFI firmware |
| Operating system | Kylin OS, UOS etc. |
I/O and expansion
| USB | 4-chUSB 3.0, 4-chUSB 2.0 |
|---|---|
| DIO/MIO | 8-chGPIO, can configured with input or output, 2-chCAN 2.0 I/O (and 2-chTTL jumper select) |
| Serial | 2-chTTL serial, maximum baud rate 115200 bps |
| Display interfaces | 1-chVGA output, maximum resolution 1920*1080@60Hz; 2-chDP output, maximum resolution 3840*2160@30Hz |
| Network interfaces | 1-ch Gigabit BASE-T I/O |
| Storage interfaces | 3-chSATA 3.0 I/O, reserved 1 BGA SSD, supports 120GB-512GB capacity |
| Expansion slots | 1-chPCIe3.0 × 16 (can split into 2 × 8), 8-chPCIe3.0 × 1 (front 4-ch × 1 can consists of 2-ch × 2) |
Environmental conditions
| Operating temperature | -40℃ ~ 65℃ (operating temperature), -40℃ ~ 85℃ (storage temperature) |
|---|---|
| Humidity | 5%~95%humidity non-condensing |
Mechanical specifications and system requirements
| Specification | 125mm×95mm |
|---|
COMPONENTS
EQIO
{{chapter}}
EQIO · COMe-D2000 Product Manual
{{page}} / {{pages}}
05 COMPONENTS
Processor and device specifications
Device figures come from vendor publications and describe the chip or module. The implemented product follows the specification tables. Optional devices are supplied with the selected configuration.
Phytium D2000
| Processor core count | 8-core |
|---|---|
| Processor micro architecture | FTC663 |
| ISA and actuation mode | ARMv8; supports ARM64 and ARM32 actuation mode |
| Up to clock | 2.3 GHz |
| Layer-2 cache | 8 MB |
| L3 cache | 4 MB |
| CPU memory controller | 2 DDR4 I/O |
| CPU PCIe resources | 34 lanes PCIe 3.0 |
| CPU network controller | 2 Gigabit Ethernet I/O |
| Other on-chip I/O | 1 × SD2.0, 4 × UART, 32 × GPIO, 4 × I2C, 1 × QSPI, 2 × general-purpose SPI, 3 × CAN, 2 × WDT, 16 × external interrupt |
Phytium D2000 (continued)
| Hardware virtualization | Supports |
|---|---|
| Floating-point and SIMD | Single/dual accuracy floating-point and ASIMD |
| Chip safety architecture | PSPA 1.0 |
Phytium X100 chipset
| Device role | Micro processor matching graphics and I/O expansion chip |
|---|---|
| GPU compute rated | 300 GFLOPS |
| Video de code | 4K@30fps; H.264/H.265, MPEG4, MPEG2 etc. |
| GPU memory supports upper limit | Up to 8GB |
| Display control I/O | 3 × DisplayPort1.4: including 2-ch up to 3840 × 2160@60Hz, additional 1-ch up to 1280 × 1024@60Hz |
| PCIe on | 1×PCIe3.0 x16 |
COMPONENTS
EQIO
{{chapter}}
EQIO · COMe-D2000 Product Manual
{{page}} / {{pages}}
05 COMPONENTS
Processor and device specifications (continued)
Phytium X100 chipset (continued)
| PCIe downlink | Vendor list 8-ch downlink connect: 2-chx2 and 6-chx1; including 2-chx1 and SATA3.0 multiplexed |
|---|---|
| Expansion I/O category | PCIe3.0, SATA3.0, USB3.1, SD/eMMC, NAND Flash, I2S audio |
| Other on-chip I/O | 2×SD/SDIO/eMMC、NAND、4×UART、96×GPIO、8×MIO、4×PWM、QSPI、2×SPI master、3×SMBus、2×CAN |
| Chip safety architecture | PSPA1.0 |
Sources: Phytium IT Co., Ltd., Phytium Tengrui D2000 high-performance desktop CPU; Phytium IT Co., Ltd., Phytium chipset X100.
Applications
EQIO
{{chapter}}
EQIO · COMe-D2000 Product Manual
{{page}} / {{pages}}
06 APPLICATIONS
From product capability to applications
Industrial equipment controller
Module and with PCIe acquisition slot and serial I/O carrier combination, can handles acquisition task management, equipment parameters configured with and UI display. Soldered DDR4 up to 16GB, suited to per task and data cache requirement determine capacity; external equipment protocol de analysis and control cycle must be application software verification.
Rail equipment information processing
Dual DP and VGA resources can used for equipment information show, Gigabit Ethernet and industrial bus connect can service to field data aggregation solution. Project implement when needed according to actual environment selection processor position, cooling and carrier connect, and separately completes product can reliability and related industry requirements verification.
Can maintenance embedded terminal
125 × 95mm module and application carrier forms can isolation compute unit, facilitates processing platform and terminal I/O design separate maintenance. System disk can around SATA or optional BGA SSD planning, equipment replace when retain match firmware, operating system, driver and carrier version log.
Integration checks
| Platform position | Stated industrial grade 2.0GHz or commercial grade 2.3GHz solution; soldered DDR4 capacity upper limit 16GB, not default fully populated. |
|---|---|
| Channel multiplexed | 2-ch CAN and 2-ch TTL per jumper select solution used; PCIe split relationship must per module pins table and firmware settings confirm. |
| Display limit | VGA per 1920 × 1080@60Hz, DP per 3840 × 2160@30Hz planning, do not apply X100 chip display upper limit. |
| Storage and temperature | BGA SSD120–512GB optional solution; check SATA installation, cooling and −40–65℃product run conditions. |
Configuration
EQIO
{{chapter}}
EQIO · COMe-D2000 Product Manual
{{page}} / {{pages}}
07 CONFIGURATION
Appearance, configuration and selection
Phytium D2000 COM Express Type 6 Module multi-angle reference
Multi-angle reference (generated from product photos); shipped units may differ.
Configuration
Provides industrial grade 2.0GHz and commercial grade 2.3GHz solution, module dimensions 125 × 95mm; BGA SSD optional 120–512GB.
| Processor position | Industrial grade 2.0GHz / commercial grade 2.3GHz |
|---|
Selection guide
| Order confirmation | Batch, I/O and environmental ratings follow the order confirmation |
|---|---|
| Published data | Compiled from published product data; EQIO provides selection and system integration |
| Configuration talk | Share the application, I/O count, environment and software so a configuration can be proposed |
Request a quotation and selection support
Email lyping@eqio.com Phone +86 182 8191 2988 Web eqio.com
Brand
EQIO · COMe-D2000 Product Manual
{{page}} / {{pages}}
EQIO Easy Quick Input Output
BRAND
Measurement and control, made easy.
EQIO product family concept
EQIO product family · concept rendering
Brand story
EQIO builds measurement and control products and systems. The name stands for Easy Quick Input Output: Easy is a clear structure that is quick to learn, Quick is a direct path to efficient delivery, and Input / Output is every link between the device under test and the control system. The soft single-cycle wave inside the Q links the brand to signals, acquisition and I/O. “Measurement and control, made easy” is our promise for every selection, integration and delivery.
What we do
| Products | Data acquisition, test instruments, control and I/O, modular platforms, software, cables |
|---|---|
| Systems | Configured to the measurand, channels, accuracy and software, from design to commissioning |
| Support | Selection advice, training, maintenance and calibration |
How we deliver
| Requirements | |
|---|---|
| Solution design | |
| Build & integration | |
| Factory test | |
| Delivery & training | |
| Ongoing support |
Email lyping@eqio.com Phone +86 182 8191 2988 Web EQIO.COM
Fuentes oficiales
Phytium IT Co., Ltd. · Phytium Tengrui D2000 high-performance desktop CPU