Cover
EQIO
VPX-3038
PRODUCT MANUAL
3U VPX Eight-Channel Isolated Serial Card
VPX communications and IO card · Industr…
Measurement and control, made easy.
Easy · Quick · Input · Output
EQIO.COM
Overview
EQIO
{{chapter}}
EQIO · VPX-3038 Product Manual
{{page}} / {{pages}}
01 OVERVIEW
3U VPX Eight-Channel Isolated Serial Card
VPX communications and IO card · Industrial communications · Data acquisition · Field equipment attach · VPX
VPX-3038 expansion 8-ch independent serial channel, supports RS-232, RS-422 and RS-485, uses signal and power isolated design, and provides surge protection and transceiver status indicator, suited used for industrial communications and field equipment attach. Independent channel facilitates respectively connect multi unit instrument or field control equipment, front panel transceiver indicator can directly view communications status. Compact 3U VPX board outline suited to multi serial measurement and control chassis, isolated and surge suppress design used for industrial equipment between signal connect.
3U VPX Eight-Channel Isolated Serial Card product photo
Product appearance reference; shipped units may differ.
Key features
8-ch independent RS-232/RS-422/RS-485 Single channel signal and power full isolated Isolated isolation voltage 1500Vrms
Up to 115.2kbps communications rate TVS protection and transceiver status indicator
Functions
EQIO
{{chapter}}
EQIO · VPX-3038 Product Manual
{{page}} / {{pages}}
02 FUNCTIONS
Functions and engineering value
8-ch independent serial attach
8 serial channel supports RS-232, RS-422 or RS-485 mode, up to rate 115.2kbps, can respectively connect different instrument or control equipment. Communications mode, baud rate and protocol should each channel configured with, board provides physical communications resources, actual equipment protocol de analysis and application management still by host application completes.
Isolated and transient protection
Each channel signal and power uses isolated design, published isolated isolation voltage 1500Vrms, and configured with TVS transient surge suppression device. Isolated metrics used for note electrical boundary, not can etc.same to any field voltage can directly attach; system still requires check grounding, cables display shield and connect equipment electrical conditions.
Chassis attach and run observe
J30J-37 connector centralized brought out serial signal, front panel TX, RX indicator facilitates observe communications active, 100 × 160mm board outline suited to 3U VPX chassis integrates. Temperature version respectively covers commercial temperature, ET2 and ET4 range, not can most wide temperature range as has supply version standard.
The functional notes explain the product’s role from published configuration. Optional functions, software and peripherals follow the project definition. Chip capability is not the same as implemented I/O.
Architecture
EQIO
{{chapter}}
EQIO · VPX-3038 Product Manual
{{page}} / {{pages}}
03 ARCHITECTURE
Signal and functional relationships
Functional block diagram
Express serial communications, isolated and host management function relationship, not indicates internal controller topology; mode, signal level and temperature etc.grade must per configured with check.
Platform and I/O
This board core function is 8-ch serial transceiver and channel isolated, not published CPU or serial controller model, block diagram not invented processing core. Host application via corresponding driver management each channel, signal via isolated and protection relationship to external equipment, RS-232/422/485 mode and temperature version all per actual configured with distinguish.
Reading the diagram Solid lines show published functional relationships, not on-board buses, bridge chips or connector pins. Optional controllers, radios, storage and software follow the configuration and interface files.
SPECIFICATIONS
EQIO
{{chapter}}
EQIO · VPX-3038 Product Manual
{{page}} / {{pages}}
04 SPECIFICATIONS
Technical specifications
Compiled from published product data. Batch, I/O and environmental ratings follow the order confirmation.
Technical data
| Connector type | J30J-37ZKW-J hole pattern connector |
|---|---|
| Up to rate | 115.2kbps adaptive |
| Surge protection | Built-in TVS TVS diode SMBJ7.0CA |
| Isolated method | Single channel signal and power full isolated; voltage isolated 1500Vrms |
| LED indicator | Front panel has TX, RX LED status LED |
Environmental conditions
| Operating temperature | Commercial grade: 0 ~ 60℃, industrial grade ET2 version: -20℃ ~ 70℃, military-grade ET4 version: -40℃ ~ 80℃ |
|---|---|
| Storage temperature | -40℃ ~ 85℃ |
| Relative humidity | 95%non-condensing |
Mechanical specifications and system requirements
| Specification | 100mm×160mm |
|---|
Core system
| Serial channel number | 8-ch independent serial, RS-232/422/485 mode |
|---|
Applications
EQIO
{{chapter}}
EQIO · VPX-3038 Product Manual
{{page}} / {{pages}}
05 APPLICATIONS
From product capability to applications
Multi instrument serial data aggregation
As measurement and control chassis requires connect multi unit serial instrument when, can used 8 independent channel respectively management wiring and communications parameters. Application software responsible for polling, command and data compiled, field should each unit verification protocol and response time, avoid 115.2kbps I/O upper limit treat as all equipment has effect data throughput.
Field control equipment attach
Per equipment electrical standard selection RS-232, RS-422 or RS-485, can different I/O control unit attach the same VPX platform. Isolated and TVS has to build electrical boundary, but long cable layout, terminal resistive and grounding solution still requires per actual field confirm, and performs complete system communications test.
Serial test and maintenance platform
8-ch serial and transceiver indicator suited to device communications bring-up and maintenance bench, can channel en number, cables and protocol parameters establish fixed mapping. Test when distinguish without transceiver active, wiring error and protocol not match, LED only reflect active status, not can single independent prove data content or communications quality.
Integration checks
| Connector pinout | Check J30J-37ZKW-J hole pattern connector channel, transceiver and reference assign, cables must follow selected mode make. |
|---|---|
| Communications parameters | 8-ch respectively settings RS-232/422/485, baud rate and protocol; 115.2kbps up to I/O rate. |
| Isolated conditions | 1500Vrms isolated and TVS device not instead of product grounding and over-voltage design, required check equipment signal level and field protection requirements. |
| Temperature and software | Commercial temperature 0–60℃, ET2 −20–70℃, ET4 −40–80℃respectively option; host driver and system compatible required confirm. |
Configuration
EQIO
{{chapter}}
EQIO · VPX-3038 Product Manual
{{page}} / {{pages}}
06 CONFIGURATION
Appearance, configuration and selection
3U VPX Eight-Channel Isolated Serial Card multi-angle reference
Multi-angle reference (generated from product photos); shipped units may differ.
Configuration
Uses J30J-37 connector, provides commercial temperature, ET2 and ET4 temperature version.
| Temperature version | 0~60℃ / ET2 -20~70℃ / ET4 -40~80℃; different version |
|---|
Selection guide
| Order confirmation | Batch, I/O and environmental ratings follow the order confirmation |
|---|---|
| Published data | Compiled from published product data; EQIO provides selection and system integration |
| Configuration talk | Share the application, I/O count, environment and software so a configuration can be proposed |
Request a quotation and selection support
Email lyping@eqio.com Phone +86 182 8191 2988 Web eqio.com
Brand
EQIO · VPX-3038 Product Manual
{{page}} / {{pages}}
EQIO Easy Quick Input Output
BRAND
Measurement and control, made easy.
EQIO product family concept
EQIO product family · concept rendering
Brand story
EQIO builds measurement and control products and systems. The name stands for Easy Quick Input Output: Easy is a clear structure that is quick to learn, Quick is a direct path to efficient delivery, and Input / Output is every link between the device under test and the control system. The soft single-cycle wave inside the Q links the brand to signals, acquisition and I/O. “Measurement and control, made easy” is our promise for every selection, integration and delivery.
What we do
| Products | Data acquisition, test instruments, control and I/O, modular platforms, software, cables |
|---|---|
| Systems | Configured to the measurand, channels, accuracy and software, from design to commissioning |
| Support | Selection advice, training, maintenance and calibration |
How we deliver
| Requirements | |
|---|---|
| Solution design | |
| Build & integration | |
| Factory test | |
| Delivery & training | |
| Ongoing support |
Email lyping@eqio.com Phone +86 182 8191 2988 Web EQIO.COM