Cover
EQIO
ERB-SWN-L01
PRODUCT MANUAL
Gigabit and 2.5G Layer-1 Ethernet Switch Board
Network and EtherCAT board · Robot inter…
Appearance reference (generated from product photos); shipped units may differ.
Measurement and control, made easy.
Easy · Quick · Input · Output
EQIO.COM
Overview
EQIO
{{chapter}}
EQIO · ERB-SWN-L01 Product Manual
{{page}} / {{pages}}
01 OVERVIEW
Gigabit and 2.5G Layer-1 Ethernet Switch Board
Network and EtherCAT board · Robot internal network · Equipment interconnect · Network and power distribution integrates
ERB-SWN-L01 provides 8-ch Gigabit Ethernet and 1-ch 2.5G network, integrates MCU health management and 3-ch independent can control 24V isolated output, supports network cascade, VLAN and industrial equipment attach. Network switch and power control centralized the same board, isolated RS-485 and PPS signal used for management and synchronous connect. Compact structure facilitates install robot and industrial equipment, suited to sensing node interconnect, network aggregation and peripheral equipment power management.
Gigabit and 2.5G Layer-1 Ethernet Switch Board product photo
Product appearance reference; shipped units may differ.
Key features
8-ch Gigabit plus 1-ch 2.5G network Supports cascade, VLAN and STP/RSTP 3-ch can control 24V isolated output
Independent MCU and RTC Isolated RS-485 and PPS connect
Functions
EQIO
{{chapter}}
EQIO · ERB-SWN-L01 Product Manual
{{page}} / {{pages}}
02 FUNCTIONS
Functions and engineering value
Gigabit and 2.5G aggregation
ERB-SWN-L01 provides 8-ch Gigabit Ethernet and 1-ch 2.5G network, switch core supports cascade and VLAN, STP/RSTP etc.function, can used for centralized connect equipment node. Port rate and switch function belongs to different metrics, specific network group, on assign and can used configured with must follow system solution confirm.
Management and synchronous connect
Independent MCU combined with RTC handles status and management task, switch unit and MCU via I2C and reset signal connect. 2-ch isolated RS-485 and 1-ch isolated PPS provides external management and synchronous signal path, PPS I/O this body not can represent has network devices already implements unified time synchronous.
Network and power coordination
Board uses 24V DC input, and provides 3-ch independent can control 24V isolated output, facilitates peripheral node group power. Each channel output capability respectively listed, network connect and power group can together planning, actual equipment load, boot current and channel at the same time operation conditions required integrates when check.
The functional notes explain the product’s role from published configuration. Optional functions, software and peripherals follow the project definition. Chip capability is not the same as implemented I/O.
Architecture
EQIO
{{chapter}}
EQIO · ERB-SWN-L01 Product Manual
{{page}} / {{pages}}
03 ARCHITECTURE
Functional blocks and system connections
Functional block diagram
Function relationship illustration, based on website I/O and configured with compiled; not indicates actual on-board circuit, independent bandwidth or not published chip interconnect implements.
Platform and I/O
This board network switch core and independent MCU forms function platform, website not has gives switch chip or MCU specific model. Data can note already published port, layer-2 switch function and management connect, but not should invent switch capacity, pack forwarding rate or processor type; isolated power belongs to single independent power function.
Reading the diagram Solid lines show published functional relationships, not on-board buses, bridge chips or connector pins. Optional controllers, radios, storage and software follow the configuration and interface files.
SPECIFICATIONS
EQIO
{{chapter}}
EQIO · ERB-SWN-L01 Product Manual
{{page}} / {{pages}}
04 SPECIFICATIONS
Technical specifications
Compiled from published product data. Batch, I/O and environmental ratings follow the order confirmation.
Core system
| 2.5G network switch chip | Supports output at least 8-ch Gigabit network and 1-ch 2.5G network, supports multi chip cascade supports loop detection, STP/RSTP, IGMP Snooping, VLAN, 802.1X port certification etc. |
|---|---|
| MCU | Clock≥72MHz, Flash≥128KB, SRAM≥32KB, add-on FLASH≥128Mb |
| RTC | MCU mount RTC RTC |
| Power I/O | Power input: 24V DC±10%, power≥78W 3-ch independent can control 24VDC±10%isolated power output, 1-ch power≥7.5W, additionally 2-ch power all ≥27W |
I/O and expansion
| External I/O | 2-ch isolated RS-485 (from the same connector brought out), rate at least 0.5Mbps, 1-ch isolated PPS synchronous signal 1-ch 2.5G network (1 independent connector brought out), 8-ch Gigabit Ethernet |
|---|---|
| Debug interface | MCU debug UART/JTAG I/O |
| Switch chip/MCU interconnect I/O | 1-chI2C, reset signal |
Environmental conditions
| Operating temperature | -20℃~55℃ (temperature-rise limit 95℃, 85℃alarm threshold), storage temperature: -40℃~+70℃ |
|---|
Mechanical specifications and system requirements
| Specification | 139 × 84 × 29mm (±2mm), weight≤0.18kg (not including pack fitted, allowed deviation±10g), board thickness 1.6mm |
|---|---|
| System requirements | FreeRTOS V10.3.1+ |
Applications
EQIO
{{chapter}}
EQIO · ERB-SWN-L01 Product Manual
{{page}} / {{pages}}
05 APPLICATIONS
From product capability to applications
Robot internal network
Can multiple robot sensing or control node attach Gigabit port, and according to overall topology used 2.5G connect and on grade equipment HMI. VLAN and loop related function can and network planning, but port configured with, actual stream amount and equipment protocol requires together verification, not cannot only based on rated rate determine block condition.
Industrial device network aggregation
Suited to compact equipment in centralized layout network switch and status management, via isolated RS-485 attach management link. Requires used STP/RSTP or multicast function when, should confirm delivery firmware and configured with ingress, and per actual device connection method test network recovery, multicast stream amount and fault handling.
Communications and auxiliary power distribution
Can requires 24V power peripheral equipment assign to 3-ch isolated output, at the same time uses board network port completes data interconnect. System should log each channel power load, start-stop policy and should network node, on electrical and single channel restart when inspection equipment recovery, avoid only per total power arrangement load.
Integration checks
| Port configured with | 8-ch Gigabit plus 1-ch 2.5G; VLAN, STP/RSTP etc.function required check firmware, configured with method and actual topology. |
|---|---|
| Output group | 3-ch can control 24V isolated output: 1-ch≥7.5W, additional 2-ch each ≥27W, required check at the same time load conditions. |
| Power and synchronous | 24V±10%, input power capability requirements≥78W; isolated PPS direction, signal level and synchronous used method required confirm. |
| Management and environment | FreeRTOS10.3.1+, 2-ch isolated RS-485; operation−20–55℃, installation dimensions 139 × 84 × 29mm. |
Configuration
EQIO
{{chapter}}
EQIO · ERB-SWN-L01 Product Manual
{{page}} / {{pages}}
06 CONFIGURATION
Appearance, configuration and selection
Gigabit and 2.5G Layer-1 Ethernet Switch Board multi-angle reference
Multi-angle reference (generated from product photos); shipped units may differ.
Configuration
Uses 24V DC input, 3-ch isolated output respectively supports at least 7.5W, 27W and 27W.
Selection guide
| Order confirmation | Batch, I/O and environmental ratings follow the order confirmation |
|---|---|
| Published data | Compiled from published product data; EQIO provides selection and system integration |
| Configuration talk | Share the application, I/O count, environment and software so a configuration can be proposed |
Request a quotation and selection support
Email lyping@eqio.com Phone +86 182 8191 2988 Web eqio.com
Brand
EQIO · ERB-SWN-L01 Product Manual
{{page}} / {{pages}}
EQIO Easy Quick Input Output
BRAND
Measurement and control, made easy.
EQIO product family concept
EQIO product family · concept rendering
Brand story
EQIO builds measurement and control products and systems. The name stands for Easy Quick Input Output: Easy is a clear structure that is quick to learn, Quick is a direct path to efficient delivery, and Input / Output is every link between the device under test and the control system. The soft single-cycle wave inside the Q links the brand to signals, acquisition and I/O. “Measurement and control, made easy” is our promise for every selection, integration and delivery.
What we do
| Products | Data acquisition, test instruments, control and I/O, modular platforms, software, cables |
|---|---|
| Systems | Configured to the measurand, channels, accuracy and software, from design to commissioning |
| Support | Selection advice, training, maintenance and calibration |
How we deliver
| Requirements | |
|---|---|
| Solution design | |
| Build & integration | |
| Factory test | |
| Delivery & training | |
| Ongoing support |
Email lyping@eqio.com Phone +86 182 8191 2988 Web EQIO.COM