Cover
EQIO
CPCI-1002
PRODUCT MANUAL
6U CompactPCI High-Precision Timing Card
CPCI timing card · Industrial measuremen…
Measurement and control, made easy.
Easy · Quick · Input · Output
EQIO.COM
Overview
EQIO
{{chapter}}
EQIO · CPCI-1002 Product Manual
{{page}} / {{pages}}
01 OVERVIEW
6U CompactPCI High-Precision Timing Card
CPCI timing card · Industrial measurement and control · Communications networking · Equipment time synchronous · CompactPCI
CPCI-1002 supports GPS, B(AC) code and B(DC) code input, provides B code and 1PPS output, has holdover, latency correction and API configured with capability, used for build unified time base measurement and control and communications system. Front panel settings antenna, code input, output connect and status indicator, facilitates and acquisition control module together installation. Latency correction used for compensation link latency, holdover function can reference temporary interrupt during keep time, used for multi equipment synchronous and field measurement system.
6U CompactPCI High-Precision Timing Card product photo
Product appearance reference; shipped units may differ.
Key features
GPS, B(AC) and B(DC) input 10-ch RS-422 time signal output 2-ch HCMOS1PPS output
GPS1PPS synchronous accuracy≤±0.2μs 15 minutes holdover accuracy≤±1ms
Functions
EQIO
{{chapter}}
EQIO · CPCI-1002 Product Manual
{{page}} / {{pages}}
02 FUNCTIONS
Functions and engineering value
Multi from source time reference
Timing card supports GPS, B(DC) and B(AC) input, can 6U CompactPCI measurement and control system provides unified time base. GPS and B(DC) reference under 1PPS synchronous accuracy ≤±0.2μs, B(AC) reference ≤±10μs, acceptance should stated used input, not can has reference unified used optimum metrics. Matching driver can read input line status.
Time distribution and holdover
10-ch RS-422 time signal and 2-ch HCMOS1PPS output can connect different receive equipment, time signal output 1PPS synchronous metrics ≤±0.2μs. Reference interrupt when published holdover metrics 15 minutes≤±1ms, and normal lock status is different conditions, application should recognition and log status change.
Configured with, compensation and status management
Driver can read GPS location, satellite number and input line status, API supports interrupt, time settings and latency correction. Compensation range 0 to 99999.9μs, stepper 0.1μs, settings can memory; actual compensation value should based on cables and receive link measurement determine, not cannot only per theoretical length directly claim system accuracy.
The functional notes explain the product’s role from published configuration. Optional functions, software and peripherals follow the project definition. Chip capability is not the same as implemented I/O.
Architecture
EQIO
{{chapter}}
EQIO · CPCI-1002 Product Manual
{{page}} / {{pages}}
03 ARCHITECTURE
Signal and functional relationships
Functional block diagram
Functional relationship not indicates internal clock circuit; synchronous accuracy, holdover accuracy and receive end system accuracy respectively de, output signal level and API per delivery note confirm.
Platform and I/O
This the board is time reference receive, holdover and signal distribution function card, published data not stated CPU or clock device model. Block diagram synchronous function centre, show three type reference, two kinds of output signal level and host API management, accuracy must per input source and operation status distinguish, not can board-level metrics directly view product time accuracy.
Reading the diagram Solid lines show published functional relationships, not on-board buses, bridge chips or connector pins. Optional controllers, radios, storage and software follow the configuration and interface files.
SPECIFICATIONS
EQIO
{{chapter}}
EQIO · CPCI-1002 Product Manual
{{page}} / {{pages}}
04 SPECIFICATIONS
Technical specifications
Compiled from published product data. Batch, I/O and environmental ratings follow the order confirmation.
Technical data
| Input signal | GPS, B (DC) code (RS-422 signal level), B (AC) code |
|---|---|
| Output signal | And output 1PPS synchronous accuracy: ≤±0.2μs, signal level: RS-422, channel count: 10-ch, physical I/O: J30J-25TJWP2-J |
| Holdover accuracy | Holdover time: 15min, holdover accuracy: ≤±1ms |
| Power consumption | Boot power consumption: <10W, steady-state power consumption: <6W |
| 1PPS | And GPS1PPS synchronous accuracy: ≤±0.2μs, and input B (DC) code synchronous accuracy: ≤±0.2μs, and input B (AC) code synchronous accuracy: ≤±10μs, signal level: HCMOS, channel count: 2-ch, physical I/O: J30J-25TJWP2-J |
I/O and expansion
| Input/output | 1 antenna input I/O, 1 B (DC) code input I/O, 1 B (AC) code input I/O, 1 output I/O |
|---|---|
| Other | 6 LED, 1 reset button |
Environmental conditions
| Operating temperature | Operating temperature: -40℃~55℃, storage temperature: -45℃ ~ 60℃ |
|---|---|
| Humidity | 95%non-condensing |
Software and timing
| Status read | Can via driver read GPS longitude, latitude, altitude, satellite number, and input signal and line status |
|---|---|
| Time settings | Can selected line signal without input when via driver settings time |
| Interrupt control | API open /related interrupt and provides response function; default 1Hz, specific function I/O matching driver |
| Latency correction | 0~99999.9μs, stepper 0.1μs, settings rear can memory |
| Automatic synchronous and self-test | Per second automatic synchronous; supports fault detection and reset |
Applications
EQIO
{{chapter}}
EQIO · CPCI-1002 Product Manual
{{page}} / {{pages}}
05 APPLICATIONS
From product capability to applications
Unified time base acquisition chassis
Match 6U CPCI system in, can toward acquisition and control module distribution time code or 1 PPS, use log used together reference. Receive end input circuit, software time and cables latency still will affect final complete accuracy, should via product measurement verification, not cannot only cite timing board output metrics.
Equipment between time synchronous
Has B code or 1PPS receive capability equipment can per signal level and I/O definition connect, build hardware time reference solution. Host software should monitoring reference line, fault and holdover status, product the table does not lists network timing protocol, if required network distribution should separately supplied corresponding equipment or software solution.
Communications and test platform timing
GPS or external B code can test and communications equipment provides reference, driver status information has to log input fault and recovery process. Bench should respectively test normal synchronous, reference loss and 15 minutes holdover conditions, and per actual receive equipment confirm HCMOS and RS-422 wiring, avoid mix used signal level.
Integration checks
| Reference conditions | GPS, B(DC) and B(AC) respectively should synchronous metrics; lock and 15 minutes holdover status must separate acceptance. |
|---|---|
| Output wiring | Check 10-ch RS-422 and 2-ch HCMOS1PPS, J30J-25TJWP2-J pinout and receive end signal level. |
| API and compensation | Confirm driver, default 1Hz interrupt, latency correction and configured with read-back; compensation range 0–99999.9μs, stepper 0.1μs. |
| Installation environment | Boot power consumption<10W, steady-state<6W, operation−40–55℃; check 6U chassis, antenna and input output cables conditions. |
Configuration
EQIO
{{chapter}}
EQIO · CPCI-1002 Product Manual
{{page}} / {{pages}}
06 CONFIGURATION
Appearance, configuration and selection
6U CompactPCI High-Precision Timing Card multi-angle reference
Multi-angle reference (generated from product photos); shipped units may differ.
Configuration
Latency correction range 0–99999.9μs, stepper 0.1μs, operating temperature -40–55℃.
Selection guide
| Order confirmation | Batch, I/O and environmental ratings follow the order confirmation |
|---|---|
| Published data | Compiled from published product data; EQIO provides selection and system integration |
| Configuration talk | Share the application, I/O count, environment and software so a configuration can be proposed |
Request a quotation and selection support
Email lyping@eqio.com Phone +86 182 8191 2988 Web eqio.com
Brand
EQIO · CPCI-1002 Product Manual
{{page}} / {{pages}}
EQIO Easy Quick Input Output
BRAND
Measurement and control, made easy.
EQIO product family concept
EQIO product family · concept rendering
Brand story
EQIO builds measurement and control products and systems. The name stands for Easy Quick Input Output: Easy is a clear structure that is quick to learn, Quick is a direct path to efficient delivery, and Input / Output is every link between the device under test and the control system. The soft single-cycle wave inside the Q links the brand to signals, acquisition and I/O. “Measurement and control, made easy” is our promise for every selection, integration and delivery.
What we do
| Products | Data acquisition, test instruments, control and I/O, modular platforms, software, cables |
|---|---|
| Systems | Configured to the measurand, channels, accuracy and software, from design to commissioning |
| Support | Selection advice, training, maintenance and calibration |
How we deliver
| Requirements | |
|---|---|
| Solution design | |
| Build & integration | |
| Factory test | |
| Delivery & training | |
| Ongoing support |
Email lyping@eqio.com Phone +86 182 8191 2988 Web EQIO.COM