Cover
EQIO
WJ-MC
PRODUCT MANUAL
Rockchip Payload Control Board
Rockchip RK3588 series processor
Appearance reference (generated from product photos); shipped units may differ.
Measurement and control, made easy.
Easy · Quick · Input · Output
EQIO.COM
Overview
EQIO
{{chapter}}
EQIO · WJ-MC Product Manual
{{page}} / {{pages}}
01 OVERVIEW
Rockchip Payload Control Board
Control and payload main board · Payload measurement and control · Vehicle-mounted embedded system · Data HMI · Rockchip
WJ-MC provides 3-ch Gigabit Ethernet, composite serial, HDMI input output, audio and GPIO I/O, supports payload data acquisition, command HMI and peripherals control, suited used for vehicle-mounted, airborne payload and embedded measurement and control system integration. Configured with 8 GB memory and 128GB storage, board on still settings RTC, wireless communications and fan connect. Compact dimensions facilitates install payload equipment, video attach, data aggregation and peripherals control centralized the same board on.
Rockchip Payload Control Board product photo
Product appearance reference; shipped units may differ.
Key features
8GB memory and 128GB storage 3-ch Gigabit LAN HDMI input, output each 1-ch
RS-232/RS-485/RS-422 composite I/O GPIO, fan and audio connect
Functions
EQIO
{{chapter}}
EQIO · WJ-MC Product Manual
{{page}} / {{pages}}
02 FUNCTIONS
Functions and engineering value
Payload data and video aggregation
Control board provides 3-ch Gigabit LAN, HDMI input and HDMI output, can used for aggregation network devices data and connect video source and display end. 8GB memory and 128GB storage support local application, video format, acquisition procedure and processing capability must be driver and target application confirm.
Industrial peripherals and status signal
RS-232/RS-485/RS-422 composite serial used for connect corresponding electrical standard equipment, GPIO overview gives at least 5-ch 3.3V TTL signal. Fan, microphone air and audio output I/O facilitates consists of payload HMI system, signal direction and pins required board connect data shall prevail.
Embedded run and maintenance
104 × 80 × 13.5mm board outline uses 12V input, run Ubuntu system, provides RTC, Wi-Fi and Bluetooth supports. USB, Type-C and independent DEBUG facilitates attach equipment and development maintenance, installation when needed arrangement board fixed, cooling and connector space.
The functional notes explain the product’s role from published configuration. Optional functions, software and peripherals follow the project definition. Chip capability is not the same as implemented I/O.
Architecture
EQIO
{{chapter}}
EQIO · WJ-MC Product Manual
{{page}} / {{pages}}
03 ARCHITECTURE
Product functional architecture
Functional block diagram
From published specification illustrative functional grouping, does not show internal circuits, on-board bus or signal routing; I/O direction actual protocol shall prevail.
Platform and I/O
Source data stated uses Rockchip RK3588 series, configured with 8 GB memory and 128GB storage, run Ubuntu 20.04.5 LTS, but not gives exact model or relationship device profile. CPU, NPU etc.supplement parameters should model confirm rear fill in, current function board already listed I/O based on.
Reading the diagram Solid lines show published functional relationships, not on-board buses, bridge chips or connector pins. Optional controllers, radios, storage and software follow the configuration and interface files.
SPECIFICATIONS
EQIO
{{chapter}}
EQIO · WJ-MC Product Manual
{{page}} / {{pages}}
04 SPECIFICATIONS
Technical specifications
Compiled from published product data. Batch, I/O and environmental ratings follow the order confirmation.
Core system
| CPU | Rockchip RK3588 series processor |
|---|---|
| Capacity | Memory 8GB+storage 128GB |
| Operating system | Ubuntu20.04.5LTS operating system |
| Clock | Has RTC function |
| Wireless function | Supports Wifi/BT |
I/O and expansion
| USB data I/O | USB3.0 I/O 1; 1-ch specification USB2.0 I/O 2; 2-ch specification USB2.0 I/O 1 group; Type-C I/O 2 |
|---|---|
| Serial and debug interface | RS-232/485/422 composite I/O 1; DEBUG debug interface 1 |
| AV interfaces | HDMI IN I/O 1; HDMI OUT I/O 1; Mic microphone air I/O 1; 3.5mm audio output I/O 1 |
| Network | Gigabit LAN network interfaces 3 |
| Peripherals control I/O | Four-wire fan I/O 1; GPIO I/O 1 |
| GPIO electrical resources (overview) | At least 5-ch3.3V TTL signal |
Environmental conditions
| Operating temperature | Operating temperature: -40℃~55℃, storage temperature: -45℃~60℃ |
|---|---|
| Humidity | Relative humidity (RH) 20%–80% |
Mechanical specifications and system requirements
| Specification | 104mm*80mm*13.5mm (±2mm) (long *wide *high) |
|---|---|
| Power | Supports 12V power input |
Applications
EQIO
{{chapter}}
EQIO · WJ-MC Product Manual
{{page}} / {{pages}}
05 APPLICATIONS
From product capability to applications
Payload control and video HMI
Can network devices, serial control I/O and HDMI video source attach the same board, from application completes payload status view, command HMI and video output. The solution suited to requires centralized management multi type I/O payload equipment, specific video latency and control protocol must follow task verification.
Vehicle-mounted equipment data node
3-ch Gigabit LAN used for organize multiple device connection, composite serial interface with compatible industrial peripherals, GPIO handles already definition status signal. 12V power facilitates around vehicle-mounted power design conversion and protection, input ripple, boot transient and installation cooling should be product solution verify against.
Compact equipment bring-up platform
Equipment development stage can uses independent DEBUG I/O maintenance system, via USB and Type-C connect test peripherals, then by HDMI output observe application UI. RTC supports local time keep, software required by itself definition log time management and other equipment synchronous method.
Integration checks
| CPU version | Source data RK3588 series, confirm specific model and delivery system image. |
|---|---|
| Video compatible | Check HDMI IN/OUT supports format, resolution and acquisition display driver. |
| GPIO and serial | Confirm at least 5-ch 3.3V TTL signal definition and composite serial selected electrical mode. |
| Power installation | Per 12V input, 104 × 80 × 13.5mm board outline check fixed and cooling space. |
Configuration
EQIO
{{chapter}}
EQIO · WJ-MC Product Manual
{{page}} / {{pages}}
06 CONFIGURATION
Appearance, configuration and selection
Rockchip Payload Control Board multi-angle reference
Multi-angle reference (generated from product photos); shipped units may differ.
Configuration
Uses 12V input and Ubuntu system, provides Wi-Fi, Bluetooth and independent debug interface.
Selection guide
| Order confirmation | Batch, I/O and environmental ratings follow the order confirmation |
|---|---|
| Published data | Compiled from published product data; EQIO provides selection and system integration |
| Configuration talk | Share the application, I/O count, environment and software so a configuration can be proposed |
Request a quotation and selection support
Email lyping@eqio.com Phone +86 182 8191 2988 Web eqio.com
Brand
EQIO · WJ-MC Product Manual
{{page}} / {{pages}}
EQIO Easy Quick Input Output
BRAND
Measurement and control, made easy.
EQIO product family concept
EQIO product family · concept rendering
Brand story
EQIO builds measurement and control products and systems. The name stands for Easy Quick Input Output: Easy is a clear structure that is quick to learn, Quick is a direct path to efficient delivery, and Input / Output is every link between the device under test and the control system. The soft single-cycle wave inside the Q links the brand to signals, acquisition and I/O. “Measurement and control, made easy” is our promise for every selection, integration and delivery.
What we do
| Products | Data acquisition, test instruments, control and I/O, modular platforms, software, cables |
|---|---|
| Systems | Configured to the measurand, channels, accuracy and software, from design to commissioning |
| Support | Selection advice, training, maintenance and calibration |
How we deliver
| Requirements | |
|---|---|
| Solution design | |
| Build & integration | |
| Factory test | |
| Delivery & training | |
| Ongoing support |
Email lyping@eqio.com Phone +86 182 8191 2988 Web EQIO.COM