Cover
EQIO
PSU-0011-RB
PRODUCT MANUAL
72 V Multi-Channel Power-Management Board
Power-management board · Robot power dis…
Appearance reference (generated from product photos); shipped units may differ.
Measurement and control, made easy.
Easy · Quick · Input · Output
EQIO.COM
Overview
EQIO
{{chapter}}
EQIO · PSU-0011-RB Product Manual
{{page}} / {{pages}}
01 OVERVIEW
72 V Multi-Channel Power-Management Board
Power-management board · Robot power distribution · Powertrain power management · Payload power
PSU-0011-RB supports 72V DC input and 72V, 24V, 12V multi etc.grade output, configured with 19-ch power channel, provides classified on electrical control, e-stop I/O, status indicator and test point, used for robot powertrain and auxiliary equipment power distribution. 4-ch powertrain power and multi-channel auxiliary power separate organize, controlled circuit on electrical when keep off, can via control signal arrangement power sequence. Each channel input output settings test point and status indicator, suited to robot powertrain, sensing and control equipment classified power integrates.
72 V Multi-Channel Power-Management Board product photo
Product appearance reference; shipped units may differ.
Key features
72V DC input 19-ch powertrain and auxiliary output 72V, 24V and 12V voltage etc.grade
Delay on electrical and controlled circuit management E-stop I/O, independent test point and indicator
Functions
EQIO
{{chapter}}
EQIO · PSU-0011-RB Product Manual
{{page}} / {{pages}}
02 FUNCTIONS
Functions and engineering value
Powertrain and auxiliary classified power
PSU-0011-RB accept 72V DC input, organize 4-ch controlled 72V powertrain output, 13-ch 12V auxiliary output and 2-ch 24V auxiliary output. Different voltage and control group facilitates respectively connect powertrain, compute and sensing equipment, specific single channel load capability must follow actual configured with confirm.
Controlled circuit on electrical sequence
Board supports delay on electrical, can control module self-test completes rear on powertrain power; uncontrolled I/O on electrical automatic on, controlled I/O default off. System can around these default status design boot procedure, and stated control signal, etc.pending conditions and fault when power keep or off.
Status observe and e-stop attach
Each channel power input output all settings independent test point and status indicator, facilitates bring-up when observe circuit status. Motor master control, e-stop and DO control I/O used for connect external control signal, complete set system shutdown logic and status diagnostics should combined with load, routing and control program item by item verification.
The functional notes explain the product’s role from published configuration. Optional functions, software and peripherals follow the project definition. Chip capability is not the same as implemented I/O.
Architecture
EQIO
{{chapter}}
EQIO · PSU-0011-RB Product Manual
{{page}} / {{pages}}
03 ARCHITECTURE
Functional blocks and system connections
Functional block diagram
Function relationship illustration, based on website I/O and configured with compiled; not indicates actual on-board circuit, independent bandwidth or not published chip interconnect implements.
Platform and I/O
The product is multi voltage, multi-channel power-management board, website not published processor or MCU model, data should around power distribution group, controlled circuit and status observe expand. Input maximum current and output channel quantity is different metrics, not can calculate each channel all can hosts same large current, also not cannot from e-stop I/O claim safety etc.grade.
Reading the diagram Solid lines show published functional relationships, not on-board buses, bridge chips or connector pins. Optional controllers, radios, storage and software follow the configuration and interface files.
SPECIFICATIONS
EQIO
{{chapter}}
EQIO · PSU-0011-RB Product Manual
{{page}} / {{pages}}
04 SPECIFICATIONS
Technical specifications
Compiled from published product data. Batch, I/O and environmental ratings follow the order confirmation.
Core system
| Input voltage/current | 72V DC, input maximum current 120A |
|---|---|
| Output voltage etc.grade | 72V、12V、24V |
| On electrical timing | Supports delay on electrical, pending control module self-test completes rear on powertrain power |
| Test configured with | Each channel power input, output all settings independent test point |
| Status indicator | Has input output circuit all equipped with independent operation status LED |
| On electrical default status | Uncontrolled I/O on electrical automatic on, controlled I/O on electrical default off |
I/O and expansion
| Power output | 72V controlled powertrain output I/O 4-ch, 12V uncontrolled auxiliary output I/O 10-ch 12V controlled auxiliary output I/O 3-ch, 24V auxiliary output I/O 2-ch |
|---|---|
| Power input | 72V power input I/O 1-ch |
| Control and signal | Motor master control I/O 1-ch, e-stop switch I/O 1-ch, DO control I/O 1-ch |
Environmental conditions
| Operating temperature | Operating temperature: -20℃ ~ 50℃, storage temperature: -20℃ ~ 60℃ |
|---|---|
| Humidity | Relative humidity (RH) 20%–80% |
Applications
EQIO
{{chapter}}
EQIO · PSU-0011-RB Product Manual
{{page}} / {{pages}}
05 APPLICATIONS
From product capability to applications
Robot powertrain power distribution
Can powertrain load and compute, communications, sensing equipment respectively arrangement to controlled 72V and auxiliary power group, via control signal organize on electrical order. System design should stated each 1-ch load and boot current, check wire, connector and input capability, not should 120A input upper limit treat as each channel output capability.
Stage boot system
Suited to requires first boot control module, completes self-test rear again to powertrain equipment power system. Can uses controlled circuit default off and delay on electrical conditions arrangement procedure, again via test point and status indicator observe result; specific delay time, control polarity and feedback mechanism requires per delivery configured with confirm.
Multi payload auxiliary power
Face at the same time used 12V, 24V and 72V load equipment, can per voltage etc.grade and control requirement group layout, reduce spread power module management complexity. Bring-up when default on electrical status, load start-stop sequence and fault recovery procedure log clear, and check each group at the same time operation conditions.
Integration checks
| Channel group | 4-ch controlled 72V; 10-ch uncontrolled 12V, 3-ch controlled 12V; 2-ch24V, total 19-ch. |
|---|---|
| Input and load | 72V DC input maximum 120A; not published each channel rated current and at the same time full load capability, not by itself calculate. |
| Boot and e-stop | Controlled circuit default off, uncontrolled default on; confirm delay, control signal and e-stop as used circuit. |
| Installation environment | Operation−20–50℃, storage−20–60℃, humidity 20%–80%; combined with load inspection temperature rise and routing. |
Configuration
EQIO
{{chapter}}
EQIO · PSU-0011-RB Product Manual
{{page}} / {{pages}}
06 CONFIGURATION
Appearance, configuration and selection
72 V Multi-Channel Power-Management Board multi-angle reference
Multi-angle reference (generated from product photos); shipped units may differ.
Configuration
Input maximum current 120A, output divided into 4-ch controlled 72V, 13-ch 12V and 2-ch 24V I/O.
Selection guide
| Order confirmation | Batch, I/O and environmental ratings follow the order confirmation |
|---|---|
| Published data | Compiled from published product data; EQIO provides selection and system integration |
| Configuration talk | Share the application, I/O count, environment and software so a configuration can be proposed |
Request a quotation and selection support
Email lyping@eqio.com Phone +86 182 8191 2988 Web eqio.com
Brand
EQIO · PSU-0011-RB Product Manual
{{page}} / {{pages}}
EQIO Easy Quick Input Output
BRAND
Measurement and control, made easy.
EQIO product family concept
EQIO product family · concept rendering
Brand story
EQIO builds measurement and control products and systems. The name stands for Easy Quick Input Output: Easy is a clear structure that is quick to learn, Quick is a direct path to efficient delivery, and Input / Output is every link between the device under test and the control system. The soft single-cycle wave inside the Q links the brand to signals, acquisition and I/O. “Measurement and control, made easy” is our promise for every selection, integration and delivery.
What we do
| Products | Data acquisition, test instruments, control and I/O, modular platforms, software, cables |
|---|---|
| Systems | Configured to the measurand, channels, accuracy and software, from design to commissioning |
| Support | Selection advice, training, maintenance and calibration |
How we deliver
| Requirements | |
|---|---|
| Solution design | |
| Build & integration | |
| Factory test | |
| Delivery & training | |
| Ongoing support |
Email lyping@eqio.com Phone +86 182 8191 2988 Web EQIO.COM