Cover
EQIO
ERB-UPWR-U02
PRODUCT MANUAL
48 V Upper-Body Power-Management Board
Power-management board · Robot upper bod…
Appearance reference (generated from product photos); shipped units may differ.
Measurement and control, made easy.
Easy · Quick · Input · Output
EQIO.COM
Overview
EQIO
{{chapter}}
EQIO · ERB-UPWR-U02 Product Manual
{{page}} / {{pages}}
01 OVERVIEW
48 V Upper-Body Power-Management Board
Power-management board · Robot upper body power distribution · Power timing control · Status management
ERB-UPWR-U02 mCU management multi-channel power enable and voltage, current, temperature status, provides 48V, 24V and 12V output, supports three-position switch, dual button and e-stop signal attach, used for robot upper body power distribution. Main power and always-on power input respectively connect, management unit read switch and e-stop signal, and via isolated RS-485 and other equipment HMI. Board suited to upper body powertrain, control and sensing equipment centralized power, multi voltage assign and status management layout the same module in.
48 V Upper-Body Power-Management Board product photo
Product appearance reference; shipped units may differ.
Key features
48V main input and 3.3V always-on power input 48V, 24V and 12V output 3-ch 12V isolated power
Dual isolated RS-485 Three-position switch, dual button and e-stop I/O
Functions
EQIO
{{chapter}}
EQIO · ERB-UPWR-U02 Product Manual
{{page}} / {{pages}}
02 FUNCTIONS
Functions and engineering value
Main power and always-on power management
ERB-UPWR-U02 48V main power and 3.3V always-on power input separate connect, from MCU and power enable and voltage, current, temperature status management. Always-on power and main power independent I/O facilitates organize management procedure, actual on electrical timing, keep conditions and fault status should per system firmware definition.
Multi voltage power group
Board provides 48V output, 24V isolated output and 3-ch 12V isolated output, can respectively arrangement powertrain and auxiliary equipment load. Website gives main input capability requirements, but not complete list has output rated value, selection when check each group load and at the same time operation conditions, not can per input total power average assign.
Operation switch and e-stop HMI
Three-position switch, normally closed dual button and e-stop I/O external operation provides connect, isolated RS-485 used for equipment management communications. E-stop via MOS enable path shut-off motor 48V and provides detection signal, related management unit name and detection path required combined with implements confirm, avoid misstate already verification safety function.
The functional notes explain the product’s role from published configuration. Optional functions, software and peripherals follow the project definition. Chip capability is not the same as implemented I/O.
Architecture
EQIO
{{chapter}}
EQIO · ERB-UPWR-U02 Product Manual
{{page}} / {{pages}}
03 ARCHITECTURE
Functional blocks and system connections
Functional block diagram
Function relationship illustration, based on website I/O and configured with compiled; not indicates actual on-board circuit, independent bandwidth or not published chip interconnect implements.
Platform and I/O
This board MCU and multi-channel power management function forms upper body power distribution platform, website only gives MCU clock and storage lower limit, not can invent specific processor model. Main input total power, always-on power capability and each output channel capability should separate listed, switch and e-stop I/O system logic requires combined with delivery firmware confirm.
Reading the diagram Solid lines show published functional relationships, not on-board buses, bridge chips or connector pins. Optional controllers, radios, storage and software follow the configuration and interface files.
SPECIFICATIONS
EQIO
{{chapter}}
EQIO · ERB-UPWR-U02 Product Manual
{{page}} / {{pages}}
04 SPECIFICATIONS
Technical specifications
Compiled from published product data. Batch, I/O and environmental ratings follow the order confirmation.
Core system
| MCU | Clock≥72MHz, Flash≥128KB, SRAM≥32KB, add-on FLASH≥128Mb |
|---|---|
| Main power input | 48V±20% DC, total input power≥3360W |
| 3.3V always-on power input | 3.3V±10% DC, power≥7.5W |
| Core power output | 48V output, 24V isolated output, 3-ch12V isolated output (1 I/O) |
I/O and expansion
| Interface with switch | Three-position switch: normally open three-position switch, switch signal to MCU dual button switch: normally closed dual button, switch signal to MCU e-stop button: normally closed knob, via MOS manage enable motor 48V power shut-off, and enable signal can be BMC detection |
|---|---|
| Debug interface | MCU debug UART/JTAG I/O |
| Other external port | 2-ch isolated RS-485, rate at least 0.5Mbps |
Environmental conditions
| Operating temperature | -20℃~55℃ (temperature-rise limit 95℃, 85℃alarm threshold), storage temperature: -40℃~+70℃ |
|---|
Mechanical specifications and system requirements
| Specification | 138 × 218 × 39mm (±2mm), weight≤0.35kg (not including pack fitted, allowed deviation±10g), board thickness 2.0mm |
|---|---|
| System requirements | FreeRTOS V10.3.1+ |
Applications
EQIO
{{chapter}}
EQIO · ERB-UPWR-U02 Product Manual
{{page}} / {{pages}}
05 APPLICATIONS
From product capability to applications
Robot upper body power distribution
Can around upper body powertrain, control and sensing equipment organize 48V, 24V and 12V power group, via MCU management power status and other unit communications. Design when establish load, channel and wiring harness should relationship, check continuous power consumption and boot shock, not cannot only used main input capability instead of single channel selection.
Equipment operation and timing control
Suited to requires three-position switch, dual button and e-stop signal together and operation equipment, used user input and power enable procedure centralized management. Switch meaning, action priority and recovery logic requires application program in stated, and via normal operation, power-off and fault reset etc.scenario verification.
Centralized run status management
Can uses MCU and 2-ch isolated RS-485 and system switch voltage, current, temperature and run status, auxiliary peripheral equipment management. Monitoring sampling method, status packet and temperature processing policy not website complete published, integrates when actual firmware protocol based on arrangement diagnostics and operations procedure.
Integration checks
| Input conditions | Main input 48V±20%, total capability≥3360W; always-on power 3.3V±10%, capability≥7.5W, respectively check. |
|---|---|
| Output load | 48V, 24V isolated and 3-ch12V isolated output; specific single channel rated and at the same time load capability required configured with confirm. |
| E-stop detection | Website controller write MCU, e-stop detection write BMC, management unit should relationship and detection path must follow delivery implements confirm. |
| Software and environment | FreeRTOS10.3.1+, 2-ch isolated RS-485≥0.5Mbps; operation−20–55℃, 138 × 218 × 39mm. |
Configuration
EQIO
{{chapter}}
EQIO · ERB-UPWR-U02 Product Manual
{{page}} / {{pages}}
06 CONFIGURATION
Appearance, configuration and selection
48 V Upper-Body Power-Management Board multi-angle reference
Multi-angle reference (generated from product photos); shipped units may differ.
Configuration
Main input 48V±20%, provides MCU debug UART and JTAG I/O, run FreeRTOS management environment.
Selection guide
| Order confirmation | Batch, I/O and environmental ratings follow the order confirmation |
|---|---|
| Published data | Compiled from published product data; EQIO provides selection and system integration |
| Configuration talk | Share the application, I/O count, environment and software so a configuration can be proposed |
Request a quotation and selection support
Email lyping@eqio.com Phone +86 182 8191 2988 Web eqio.com
Brand
EQIO · ERB-UPWR-U02 Product Manual
{{page}} / {{pages}}
EQIO Easy Quick Input Output
BRAND
Measurement and control, made easy.
EQIO product family concept
EQIO product family · concept rendering
Brand story
EQIO builds measurement and control products and systems. The name stands for Easy Quick Input Output: Easy is a clear structure that is quick to learn, Quick is a direct path to efficient delivery, and Input / Output is every link between the device under test and the control system. The soft single-cycle wave inside the Q links the brand to signals, acquisition and I/O. “Measurement and control, made easy” is our promise for every selection, integration and delivery.
What we do
| Products | Data acquisition, test instruments, control and I/O, modular platforms, software, cables |
|---|---|
| Systems | Configured to the measurand, channels, accuracy and software, from design to commissioning |
| Support | Selection advice, training, maintenance and calibration |
How we deliver
| Requirements | |
|---|---|
| Solution design | |
| Build & integration | |
| Factory test | |
| Delivery & training | |
| Ongoing support |
Email lyping@eqio.com Phone +86 182 8191 2988 Web EQIO.COM