Cover
EQIO
ERB-SWN-L02
PRODUCT MANUAL
Multi-Port Gigabit Layer-2 Ethernet Switch Board
Network and EtherCAT board · Robot inter…
Measurement and control, made easy.
Easy · Quick · Input · Output
EQIO.COM
Overview
EQIO
{{chapter}}
EQIO · ERB-SWN-L02 Product Manual
{{page}} / {{pages}}
01 OVERVIEW
Multi-Port Gigabit Layer-2 Ethernet Switch Board
Network and EtherCAT board · Robot internal network · Distributed equipment interconnect · Auxiliary power distribution
ERB-SWN-L02 switch core supports at least 11-ch Gigabit Ethernet, board external brought out 10-ch network and settings internal interconnect, provides 7-ch24V and 4-ch12V independent can control isolated power, used for distributed equipment interconnect. 5-ch isolated RS-485 facilitates attach management equipment, switch unit and MCU via internal I/O connect, network and power output group organize. Suited to robot sensing node, multi equipment connection and distributed control system, communications aggregation and auxiliary power centralized layout.
Multi-Port Gigabit Layer-2 Ethernet Switch Board product photo
Product appearance reference; shipped units may differ.
Key features
10-ch external Gigabit Ethernet 7-ch 24V, 4-ch 12V can control isolated output 5-ch isolated RS-485
Supports cascade, VLAN and STP/RSTP MCU management and RTC
Functions
EQIO
{{chapter}}
EQIO · ERB-SWN-L02 Product Manual
{{page}} / {{pages}}
02 FUNCTIONS
Functions and engineering value
Multi-port Gigabit Ethernet connect
ERB-SWN-L02 switch core supports at least 11-port Gigabit Ethernet, board external actual brought out 10-ch, additional has internal interconnect resources. External port quantity should per board-level configured with note, not can chip port total directly treat as can connect external equipment number; cascade and network group required combined with system topology planning.
Layer-2 switch and status management
Switch core supports VLAN, STP/RSTP, multicast listen and port certification etc.function, independent MCU and RTC used for management related task. 5-ch isolated RS-485 provides peripheral management connect, switch unit and MCU between interconnect resources can used for matching firmware function, specific management I/O must follow delivery implements confirm.
Multi etc.grade isolated auxiliary power
Board settings 7-ch 24V and 4-ch 12V independent can control isolated power, can per voltage and load group connect peripheral equipment. Each channel power requirements different, website input capability gives lower limit rather than complete load budget, not cannot from this claim has output can any conditions under at the same time up to listed capability.
The functional notes explain the product’s role from published configuration. Optional functions, software and peripherals follow the project definition. Chip capability is not the same as implemented I/O.
Architecture
EQIO
{{chapter}}
EQIO · ERB-SWN-L02 Product Manual
{{page}} / {{pages}}
03 ARCHITECTURE
Functional blocks and system connections
Functional block diagram
Function relationship illustration, based on website I/O and configured with compiled; not indicates actual on-board circuit, independent bandwidth or not published chip interconnect implements.
Platform and I/O
The board multi-port Gigabit switch core, independent MCU and isolated power group consists of network and auxiliary power distribution platform, published data not has specified chip model. Should respectively lists core at least 11-port resources, board 10-ch external port and internal interconnect relationship, not can on-chip capability write into already brought out external I/O.
Reading the diagram Solid lines show published functional relationships, not on-board buses, bridge chips or connector pins. Optional controllers, radios, storage and software follow the configuration and interface files.
SPECIFICATIONS
EQIO
{{chapter}}
EQIO · ERB-SWN-L02 Product Manual
{{page}} / {{pages}}
04 SPECIFICATIONS
Technical specifications
Compiled from published product data. Batch, I/O and environmental ratings follow the order confirmation.
Core system
| Multi-port Gigabit Ethernet switch chip | Supports at least 11-ch Gigabit network network switch, supports multi chip cascade supports loop detection, STP/RSTP, IGMP Snooping, VLAN, 802.1X port certification etc.L2 switch core function |
|---|---|
| MCU | Clock≥72MHz, Flash≥128KB, SRAM≥32KB |
| RTC | MCU mount RTC RTC |
| Power output | 7-ch independent can control 24VDC±10%isolated power (4-ch single channel power≥7.5W, 1-ch power≥1W, 2-ch single channel power≥50W) 4-ch independent can control 12VDC±10%isolated power (1-ch power≥1W, additionally 3-ch single channel power≥2W) |
| Power input | 24V DC±10%, power≥80W |
I/O and expansion
| External I/O | MCU: 5-ch isolated RS-485,including 2 connector respectively includes 1-ch24V, Gigabit switch: 10-ch Gigabit Ethernet |
|---|---|
| Debug interface | MCU debug UART/JTAG I/O |
| Interconnect I/O | Switch and MCU: 1-chI2C, 1-ch reset signal, 1-ch network |
Environmental conditions
| Operating temperature | -40℃~55℃ (temperature-rise limit 95℃, 85℃alarm threshold), storage temperature: -55℃~+70℃ |
|---|
Mechanical specifications and system requirements
| Specification | 118 × 148 × 23mm (±2mm), weight≤0.12kg (not including pack fitted, allowed deviation±10g), board thickness 1.6mm |
|---|
Applications
EQIO
{{chapter}}
EQIO · ERB-SWN-L02 Product Manual
{{page}} / {{pages}}
05 APPLICATIONS
From product capability to applications
Distributed robot network
Can used 10-ch external Gigabit port connect spread robot equipment node, and via switch function organize network group and on grade connect. Requires avoid loop or control multicast stream quantity when, should confirm actual firmware function and configured with ingress, again per actual node quantity and data stream verification system network.
Multi device communications and power distribution
Suited to network interconnect and 24V, 12V auxiliary power centralized the same module, per equipment voltage and load selection corresponding isolated output. System design should establish port, power channel and equipment should relationship, item by item check boot shock, continuous load and channel at the same time used power conditions.
Distributed status management
Can uses 5-ch isolated RS-485 and peripheral management equipment switch status, again combined with MCU and RTC organize equipment management procedure. Part serial connector still includes 24V power, field routing requires stated power and signal pinout, network fault and single equipment restart recovery process should bring-up in inspection.
Integration checks
| Port aperture | Switch core≥ 11-ch Gigabit, board external 10-ch; internal network interconnect not can as into extra external connector. |
|---|---|
| Power group | 7-ch24V, 4-ch12V isolated output; per channel check power and at the same time load, not cannot only per input≥80W estimate. |
| Management I/O | 5-ch isolated RS-485, part connector including 24V; switch function, configured with tool and MCU software per delivery confirm. |
| Operation conditions | 24V±10%input, operation−40–55℃, storage−55–70℃; board outline 118 × 148 × 23mm. |
Configuration
EQIO
{{chapter}}
EQIO · ERB-SWN-L02 Product Manual
{{page}} / {{pages}}
06 CONFIGURATION
Appearance, configuration and selection
Multi-Port Gigabit Layer-2 Ethernet Switch Board multi-angle reference
Multi-angle reference (generated from product photos); shipped units may differ.
Configuration
Uses 24V DC input, network core settings internal interconnect, board dimensions 118 × 148mm.
Selection guide
| Order confirmation | Batch, I/O and environmental ratings follow the order confirmation |
|---|---|
| Published data | Compiled from published product data; EQIO provides selection and system integration |
| Configuration talk | Share the application, I/O count, environment and software so a configuration can be proposed |
Request a quotation and selection support
Email lyping@eqio.com Phone +86 182 8191 2988 Web eqio.com
Brand
EQIO · ERB-SWN-L02 Product Manual
{{page}} / {{pages}}
EQIO Easy Quick Input Output
BRAND
Measurement and control, made easy.
EQIO product family concept
EQIO product family · concept rendering
Brand story
EQIO builds measurement and control products and systems. The name stands for Easy Quick Input Output: Easy is a clear structure that is quick to learn, Quick is a direct path to efficient delivery, and Input / Output is every link between the device under test and the control system. The soft single-cycle wave inside the Q links the brand to signals, acquisition and I/O. “Measurement and control, made easy” is our promise for every selection, integration and delivery.
What we do
| Products | Data acquisition, test instruments, control and I/O, modular platforms, software, cables |
|---|---|
| Systems | Configured to the measurand, channels, accuracy and software, from design to commissioning |
| Support | Selection advice, training, maintenance and calibration |
How we deliver
| Requirements | |
|---|---|
| Solution design | |
| Build & integration | |
| Factory test | |
| Delivery & training | |
| Ongoing support |
Email lyping@eqio.com Phone +86 182 8191 2988 Web EQIO.COM