Cover
EQIO
ERB-ECAT-C01
PRODUCT MANUAL
Five-Port EtherCAT Communication Board
Network and EtherCAT board · Robot commu…
Measurement and control, made easy.
Easy · Quick · Input · Output
EQIO.COM
Overview
EQIO
{{chapter}}
EQIO · ERB-ECAT-C01 Product Manual
{{page}} / {{pages}}
01 OVERVIEW
Five-Port EtherCAT Communication Board
Network and EtherCAT board · Robot communications · Motion control network · Bus interconnect · EtherCAT
ERB-ECAT-C01 provides 5-ch independent brought out EtherCAT I/O and 2-ch isolated RS-485, supports 100Mbps full dual industrial and distribution clock related function, integrates MCU management and 24V DC input, used for motion control network attach. Each channel EtherCAT uses independent connector, facilitates organize equipment link, isolated serial used for peripheral management connect. Compact board outline and RTC suited to robot actuation unit and automation equipment integrates, can as multi node motion control network in communications board card.
Five-Port EtherCAT Communication Board product photo
Product appearance reference; shipped units may differ.
Key features
5-ch independent connect EtherCAT I/O 100Mbps full dual industrial Distribution clock and linear topology supports
2-ch isolated RS-485 MCU management and RTC
Functions
EQIO
{{chapter}}
EQIO · ERB-ECAT-C01 Product Manual
{{page}} / {{pages}}
02 FUNCTIONS
Functions and engineering value
5-ch EtherCAT connect
ERB-ECAT-C01 external provides 5-ch EtherCAT I/O, all via independent connector brought out, facilitates organize multiple equipment node physical connect. Website at the same time lists single ESC at least 3-port capability, on-board chip quantity and 5-port between connect implements and not published, not cannot from this inferred topology.
Timing and topology resources
Published ESC capability including 100Mbps full dual industrial, distribution clock, linear topology and redundant loop related supports, can as motion network solution design reference. Specific main from role, synchronous accuracy and fault recovery still depends on to actual chip combination, firmware and network configured with, should system layer verification.
Management and maintenance I/O
Board integrates MCU, RTC and 2-ch isolated RS-485, used for matching equipment management and peripheral communications, MCU UART and JTAG facilitates debug maintenance. 24V input and compact board outline suited to embedded equipment, I/O power, signal level and management protocol requires per actual wiring and firmware implements confirm.
The functional notes explain the product’s role from published configuration. Optional functions, software and peripherals follow the project definition. Chip capability is not the same as implemented I/O.
Architecture
EQIO
{{chapter}}
EQIO · ERB-ECAT-C01 Product Manual
{{page}} / {{pages}}
03 ARCHITECTURE
Functional blocks and system connections
Functional block diagram
Function relationship illustration, based on website I/O and configured with compiled; not indicates actual on-board circuit, independent bandwidth or not published chip interconnect implements.
Platform and I/O
Product EtherCAT communications resources, MCU management unit and RTC forms, website not listed ESC or MCU specific model. Single chip port capability, 5-ch board-level connector and system network role requires separate note; protocol standard supports not should extend without provides certification, synchronous accuracy or motion control performance claim.
Reading the diagram Solid lines show published functional relationships, not on-board buses, bridge chips or connector pins. Optional controllers, radios, storage and software follow the configuration and interface files.
SPECIFICATIONS
EQIO
{{chapter}}
EQIO · ERB-ECAT-C01 Product Manual
{{page}} / {{pages}}
04 SPECIFICATIONS
Technical specifications
Compiled from published product data. Batch, I/O and environmental ratings follow the order confirmation.
Core system
| ESC chip | Single ESC chip has at least 3 EtherCAT port (at least 2 built-in PHY), complies with ETG.1000 standard supports 100Mbps full dual industrial, distribution clock synchronous, redundant loop design and linear topology |
|---|---|
| MCU | Clock≥72MHz, Flash≥128KB, SRAM≥32KB |
| RTC | MCU mount RTC RTC |
| Power input | 24V DC±10%, power≥15W |
I/O and expansion
| External I/O | 2-ch isolated RS-485 (from the same connector brought out), 5-chEtherCAT (5-ch all independent connector brought out) |
|---|---|
| Debug interface | MCU debug UART/JTAG I/O |
Environmental conditions
| Operating temperature | -40℃~55℃ (temperature-rise limit 95℃, 85℃alarm threshold), storage temperature: -55℃~+70℃ |
|---|
Mechanical specifications and system requirements
| Specification | 78 × 79 × 25.6mm (±2mm), weight≤0.04kg (not including pack fitted, allowed deviation±10g), board thickness 1.6mm |
|---|
Applications
EQIO
{{chapter}}
EQIO · ERB-ECAT-C01 Product Manual
{{page}} / {{pages}}
05 APPLICATIONS
From product capability to applications
Motion control network attach
Can robot or automation equipment in used 5 independent connector organize EtherCAT circuit, and via isolated RS-485 connect management equipment. Deployment when first confirm board network in role and port relationship, again check master software, from station describe and equipment link, avoid I/O quantity directly etc.same to control axis count.
Distributed actuation unit
Suited to as distributed actuation equipment communications hosts board, network connect and management I/O centralized compact space internal. Requires uses distribution clock when, should check node supports, master configured with and synchronous policy, and actual cables length and equipment load under verification timing behaviour, not can add not published accuracy value.
Device communications bring-up
Can uses independent EtherCAT connector, isolated serial and MCU debug interface build device communications bring-up environment, respectively observe application link and management status. Redundant or link-loss recovery has requirements system, should confirm specific firmware supports and test switch, not cannot only from chip function list treat as system already enable.
Integration checks
| Port and chip | External 5-chEtherCAT; single ESC≥ 3-port device capability, on-board chip quantity and topology not published. |
|---|---|
| Protocol and synchronous | 100Mbps full dual industrial and distribution clock etc. Published supports item; main from role, synchronous accuracy and redundant mechanism required confirm. |
| Management and power | 2-ch isolated RS-485, MCU UART/JTAG; 24V±10%, power capability requirements≥15W. |
| Structure and environment | 78 × 79 × 25.6mm, weight≤0.04kg; operation−40–55℃, storage−55–70℃. |
Configuration
EQIO
{{chapter}}
EQIO · ERB-ECAT-C01 Product Manual
{{page}} / {{pages}}
06 CONFIGURATION
Appearance, configuration and selection
Five-Port EtherCAT Communication Board multi-angle reference
Multi-angle reference (generated from product photos); shipped units may differ.
Configuration
Uses 24V input, provides MCU debug UART and JTAG connect, board dimensions 78 × 79mm.
Selection guide
| Order confirmation | Batch, I/O and environmental ratings follow the order confirmation |
|---|---|
| Published data | Compiled from published product data; EQIO provides selection and system integration |
| Configuration talk | Share the application, I/O count, environment and software so a configuration can be proposed |
Request a quotation and selection support
Email lyping@eqio.com Phone +86 182 8191 2988 Web eqio.com
Brand
EQIO · ERB-ECAT-C01 Product Manual
{{page}} / {{pages}}
EQIO Easy Quick Input Output
BRAND
Measurement and control, made easy.
EQIO product family concept
EQIO product family · concept rendering
Brand story
EQIO builds measurement and control products and systems. The name stands for Easy Quick Input Output: Easy is a clear structure that is quick to learn, Quick is a direct path to efficient delivery, and Input / Output is every link between the device under test and the control system. The soft single-cycle wave inside the Q links the brand to signals, acquisition and I/O. “Measurement and control, made easy” is our promise for every selection, integration and delivery.
What we do
| Products | Data acquisition, test instruments, control and I/O, modular platforms, software, cables |
|---|---|
| Systems | Configured to the measurand, channels, accuracy and software, from design to commissioning |
| Support | Selection advice, training, maintenance and calibration |
How we deliver
| Requirements | |
|---|---|
| Solution design | |
| Build & integration | |
| Factory test | |
| Delivery & training | |
| Ongoing support |
Email lyping@eqio.com Phone +86 182 8191 2988 Web EQIO.COM